Other Service Provider Subjects

Hallo Folks,We are reciving logggin message from last one month in our secondary aggrigation router from one of the PE router.The CCTV traffic is running on MVPN.The message is as follows47677: Jun 17 12:25:06.451 GMT: %PIM-6-INVALID_RP_JOIN: Receive...

dear  allI want to configure classes for Internet users, who has download limit e.g. 1GBafter finish his quoita his band with will dropdown on 64Kbps for certain period.than disconnect the user.AAA configurationaaa group serverradius AAA-SERVERS ser...

Hello,I´m currently researching for a solution for PPPoE broadband access but I´m required to use an external DHCP Server for IP addressing allocation.I'm wondering how a DHCP Relay could be configured in a Cisco BRAS (7200, ASR1000).  The following ...

Hi - We have an  ISP network and sell increments of a 10Gb WAN interface to customers.At the  moment we are policing inbound at the edges of our network to rate  limuit L2VPN bandwidth and policing inbound and outbound at the egress  of out network f...

Hi,I am deploying a service control solution for an enterprise that want to monitor and control the bandwidth utilization. The solution contains a SCE, CM, SM, MySQL DB and Console SCA BB machine. I need to develop usage reports per subnet. I tried t...

I have two laptops [Windows 7] each connected on end of 20Mbps pipe.  The MTU of the NICs is 1500bytes. Maximum pingable data size end-to-end  is only 1472 bytes with DF-bit set. When I initiate a normal windows  based file transfer end-to-end the th...

I have a C877 DSL router that I am trying to connect as a linknet so that I can run an igp on it to route my public ip's and private networks back through the DSL. Here is a bad ASCII drawing.Cisco877 --------------- Lucent Stinger DSL --------------...

Hi everyone ,I just want to know how many E1s can cisco 3845 routers support?Warm regards,

We are running ISG on a 10K with Broadhop and using TAL for automatic login for our Customers.  I'm wondering if there is a way to limit the number of IP sessions per Customer.  For instance, if a Customer has a switch or wireless router with multipl...

Hello,We have recently added a Speakeasy Business Ethernet and have a RVS4000 Router.My question is: is there a way to specify the duplex rate on the WAN side of the router? I have seen the ability to specify on the LAN side per each individual port ...

Good Day,What could be the reason for a MC28U line card to enter a state of RF muting? After investing some time in troubleshooting both IP and HFC network, we had to reboot the cmts inorder to resolve the problem. It worked for some hours and again ...