Hello Together,we installed a new FMC in Azure for some testings. Now I stuck because how can I add a physical FTD to this FMC in Azure Cloud? I tried it form Inside an office with the normal command "configure manager add ....", but it won´t work. T...
Hi, I always had a wrong understanding when I typed "no aaa new-model", it meant to delete all aaa. There is no aaa setting in the configuration. It will switch back to local authentication. But recently, I found when I type "no aaa new-model" and I...
Hi AllWe are looking at replacing our ASA5545X with a new firewall.We have already replaced a smaller model with a Firepower managed in cdFMC within CDO, its working well.What are peoples thoughts, stay with the ASA code or move to Firepower?Also, th...
Hi Community! Is it possible to install VSOM 7.12 on a UCSC-C220-M4L model server? Thanks!
How do you change the camera model on a VSOM camera template in VSOM 7.12.1
I have replaced 10 ISE servers (SNS-3595-K9 with SNS-3655-K9) and need to secure wipe the old hard drives before disposal. How can I access the hard drives on a SNS-3595 chassis to run a secure wipe application? __PRESENT __PRESENT
Hello, in VSOM, I have added a new Axis camera and created a new camera in the system and selected to replace the existing camera. It is working and recording but getting this error that will not clear: "Motion window is not configured on the camera....
Hi GuysI am looking to replace some ASA 5545-X firewalls, what is the best model to move to ?I am looking at - FPR-1150 or FPR-2120What is recommended?Cheers
Hi, I have an AXIS M3057-PLVE that all of a sudden started showing in VSOM as double panoramic view. When you go to the camera itself in the web interface it doesn't show that way and I don't see how to adjust the stream so it doesn't show that way i...
Hi GuysI am configuring remote access VPN on my FTD, this is setup via cdFMC aka SSC managed in the cloud.Am I correct in saying to do this you go to Integrations > Other integrations > realmsCreate the Realm and LDAP servers, do you have to set the ...
Hi everyone,I have an issue with SASD. When I opened it on my laptop, the cameras were working fine. However, after installing SASD on my PC, the cameras are showing a black screen when I try to view them.!
Is there a statement of volatility for the CISCO DX-80 or is there a way to ensure that all user accessible memory is erased?
Hello team,I have a topology as attached ,needed guidelines to setup fmc in high availability,as well what are the options of clustering ftds in different sites?
Hi all,I’m having an issue with a Sony EVI-X200C PTZ camera connected to a Cisco Webex Room Kit Plus via RJ45 to the codec. At first I was having a lot of odd issues, and after I swapped out a regular RJ45 cable for a cross-over cable, things started...
I have a Cisco CIVS-IPC-6630 camera that will not allow me to set up motion configuration. I get this error: "Error message:[Unable to listen to device for events. failed to turn on event history for motion events [failed to set new EventHRSetting's:...
