Routers - Small Business

Routers tailored for small businesses, providing efficient and reliable connectivity for your growing company.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 

Forum Posts

Cisco’s security team has released an advisory for: RV340 Series Small Business routers (PSIRT Notice)  Fix for bug CSCwc53007- RV34x GUI not accessible –  The recommended fix is to upgrade to firmware version 1.0.03.29RV082, RV042, RV016 (PSIRT Noti...

CoreyP319 by Cisco Employee
  • 1405 Views
  • 0 replies
  • 2 Helpful votes

Hello!   This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful.    Virtual Assistant - Discover support content and options for your gearSupport page index - Contains a...

CoreyP319 by Cisco Employee
  • 3878 Views
  • 4 replies
  • 0 Helpful votes

Hello,I have the log configured on the RV345 router to send me email alerts with a severity of error and higher.  A few times a day I get an alert with the following: <error>dnsmasq: failed to allocate -1 bytes<error>dnsmasq: failed to parse lease da...

EvanC75 by Level 1
  • 990 Views
  • 1 replies
  • 0 Helpful votes

Hello Everyone,      I'm looking at getting the C1116-4P for a branch office.  This office will have a layer 2 point to point connection provided by the ISP back to the HQ.  One of the ideas being entertained as well is to have a separate Internet co...

I have an RV345p (inherited when I got the job).I turned on vlans and gave each its on IP range and VLAN#.They are all subnets of the 10.x.x.x network.Each subnet is 10.10.10.x /24 or 10.20.20.x/24 etc.I select UNTAG for the VLAN that is on that port...

jrc3 by Level 1
  • 560 Views
  • 1 replies
  • 0 Helpful votes

I know you can limit upload bandwidth on the RV320 with the documentation here but cannot find the same option on the RV340.I have a chatty application on it's own VLAN that I want to limit by priority or rate so it does not use all the upload bandwi...

I bought a 3 pack of 240AC system and powered them on via a 24 port Cisco POE switch. They were all on when I went to configure the primary AP. I configured it and had to turn the switch off. Upon powering back on the SSID I configured nor the initia...