Routers - Small Business

I thing that fw 2.0.0.7-k9 is quite good and is much much better than 1.0.0.9 (witch was useless). I don't have problem with router since I upgraded fw. What I'm really looking for is that new fw would have dual-band 2.4 and 5 GHz. I heard that radio...

Hi guys,I just noticed something very strange. I have my Cisco SA 520W router set up to broadcast my virtual access point. I even have it now as OPEN with no security for the testing purposes (Since I was thinking that the WPS or WPA may be the issue...

I would like to use Wake-On-Lan to send a Magic Packet to my PC to power it up - from a distant location over QuickVPN. WOL is working locally, and I can see running devices from a remote location with the QuickVPN client. But I can not broadcast my ...

I am trying to forward ports over vpn between two rvs4000's.Both sites have rvs4000 as acting router\gateway etc. VPN is established and been working for months.Firmware version on both is V1.3.0.5.Site 1 has a static ip and currently hosts web serve...

Our rvl 200 router seems to loose connections every once in a while we have the firmware form November 2008.  Is any one else having this problem or do you have any ideas.  We have a smc networe 10/ 100 24 port dual spped switch.  We have about 15 co...

Dear all, Below is my doubts:- The Lynksys commercial area says that the router works with Frame Relay. In the configuration options there PPPT the protocol, but the protocol that my ISP sent me is PPP. Which protocol I have to configure?OBS.: The ne...

Hi guys,I recently got a new SA 520W and since this is my first Cisco router I am still learning my way through its administration etc. I would like to ask for your help ragarding the following problem:I have PPPoE from ATT and its forced to 1492 MTU...

Just purchased a RV042 for our office. We have an IP block of addresses, and 3 webservers. Configured the primary interface with 1st usable IP in the block, then set up one-to-one NAT for the next 3 public IP's directed to 3 private LAN IP's of serve...

I have recently configured RVS4000 for VPN use.  The office LAN is the RVS4000 (IP 192.168.1.1) behind a Thomson 516 (in bridge mode, the RVS handling PPPoE authentification), 1 machine running xp pro used as a file and print server, 3 xp workstation...

Hello all,I have been using the WRVS4400N with the most recent firmware update, The things runs like a charm.But:-how do i go about settin up a vnp connection to use when am not home.Can it support any other cisco VPN clients rather than just the Qui...

I'm having massive problems with my RVS4000. All the problems I'm experiencing might be related to the network configuration I'm using. Basically on one RVS4000 port I'm using a HomePlug Adapter that communicates with 2 other remote devices. One is a...

I have several Mac based applications that are not working with UPnP on my RV082 router. It's not listed as a compatible router on Apple's MobileMe Back To My Mac hardware compatibility list. Is there a way to manually configure port forwarding for t...

Here's what I want to do:Allow a remote user to SSL VPN into my network, but that user only has access to a specific machine and specific ports on that machine.For example, presume the machine on my local network is at 192.168.1.5 and I only want to ...

I have an RV042 that has a VPN gateway connection that periodically just dies. The connection will be fine for a day and then simply die. I was previously using a wrv200 gateway to gateway and had no issues at all. The issues only came about when I r...