Routing and SD-WAN

We use the full Cisco Secure Endpoint client that has the AnyConnect client as part of the suite. Over the past couple of days clients have been getting auto updates that also moved the AnyConnect module up to 5.1.17.  When the users try to connect t...

Good day all,I am trying to extended PTP form one data center to another but not sure if the way it is set up it is possible to do so. The flow looks like this:NX9K-C93108TC-FX3P(L3) 192.168.105.33 --> NX9K-C93180YC-EX(L2) vlan2300 --> Sw Stack C9500...

MX67 on 18.211 connecting to 2x fully patched 2016 DCs with self-signed certificatesNot sure when this happened, but noticed that I am getting a WMI error in the dashboard when connecting to either AD server in Security & SD-WAN - Active Directory. T...

While analyzing Cisco Jabber to Cisco Jabber communication using Wireshark, I noticed the Audio Media has the DSCP of CS0, As you can see below, the DSCP has CS0 in the RTP packet, which is QoS terms is best effort – first in, first out. This gives d...

Hi, I'm currently studying or at least trying to study for the CCNA exam and bought a Cisco 1800 series router to play around with and get some real hands on experience.  It seems to mostly work ok but I keep getting an error message, see screenshot ...

o we just upgraded to a new 2gb enterprise fiber connection to the PORT 1 of our MX-105All is working fine and the performance is pretty darn good.My question is when connected with a windows client on lt2p VPN connection, I seem to be hitting some s...

I want to configure a C1111-8P ISR1100 router with Comcast as the primary source of internet and t-mobile 4G as a secondary.I am able to login to the router from CLI and WebUI.vrouter#show ip interface briefInterface IP-Address OK? Method Status Prot...

Hi We are using MS switch as wan switch to segregate isp 1 and 2. As we know meraki devices needs to be connected to meraki cloud to get live and pass any traffic. PFA diagram and let us know, do we need to assign public ip to wan switch to get merak...

I'm having an issue where the firmware updates for my Yealink MP52-E2 and MP58-E2 phones are failing over Meraki SD-WAN. Has anyone come across this issue and been able to resolve it?

We have a Meraki MX95 that allows employees to connect int using Secure Client VPN. We are authenticating SAML to Microsoft Azure Entra ID.We are going to add some vendor systems behind a vendor provided router/firewall. I don't know the make/model o...

Unsure if this is an MX or Starlink issue, however to avoid the obvious negatives of double NAT and two DHCP servers on a network, I put the Starlink router (gen 3) into bypass mode so that the MX68 it is connected to can perform routing/DHCP/NAT dut...

Hello, everyone.I have a fairly short question, what is the difference between the NS (Negate-Signal) flag and S (Signal) flags in the output of the multicast routing table in IOS-XR? I see these two fairly oftenFor example:My book (IP Routing on on ...

Hi ,So VRFs are finaly here on MX. I just deployed MX 26.1.2 on my C8121What's newAdded support for configuring Virtual Router Forwarding domains (VRF) through the Early Access feature program.So that's true , I can configure the VRFs from the page O...

Hi ,I have been playing a while with VRFs and a C8121-MX ( running MX 26.1.4  ) and I have noticed 2 things : 1- VRFs adds a 8byte overhead to the AutoVPN header.This causes MTU issues in my testing if the topology is using a MTU lower than standard....