Hello A quick question. There is some confusion on the Cisco web sites about the VLAN ACL function. I am purchasing a 3650, do I need a LAN Base or IP Base for this functionality? My needs are pretty basic, I have 4 VLANs, I just want to be able to ...
I Have Server Farm 10.0.0.0/24 which have to connect with customer server Farm also in same range 10.0.0.0/24 . the connection is many-to-many both side can initial connection. so i'm just looking way to success solution without 254 line of static ma...
Hi,i want to implement DMVPN to one of our branch as a fail over link if the MPLS point to point is down.The MPLS VPN is working fine but due to SP faults we are experiencing frequent link downs.so i want to place a dsl router at branch and configure...
Hi, Would you be able to assist with a NAT configuration on a ISR 4331 router? Apologies if this request is quite simple. I have tried applying a configuration on the router without success See the attached JPEG picture. Our Solarwinds server ...
I have installed a CSR1000V on a Linux virtalization and given 4 CPUs, 10 GB of RAM, then activated the license as per the procedure. but in the license details command output is is showing as active & not in use. Please suggest me on the same. sho...
Hello all, I currently have an issue with my BGP failover configuration. Current setup I have 2 Different ISPs going to 2 Different buildings. One public address space given /24 BGP fail over is configured through inside as no Point to Point conn...
Hi all, I want to connect the router to two nexus 9k using a L2 switch. I follow the document here (https://www.cisco.com/c/en/us/support/docs/ip/ip-routing/118997-technote-nexus-00.html), and this is what I have done so far: Keep alive link: L3 (1...
Could someone tell me if this sku is avalible on México??Best regards.
In named eigrp, are stub-site and stub options allowed? See bold below. router eigrp test ! address-family ipv4 unicast autonomous-system 1 ! af-interface Tunnel100 hello-interval 20 hold-time 60 stub-site wan-interface exit-af-int...
hai sir, i have problem in my 819- HG- G- 4G- K9 Router , flash and NVRAM (no bootldr) got format by mistake , now we stuck in rommon mode..i try xmodem , tftpdnld ...etc.. could you please help me to fix it ...
We bought 2 Cisco C3650-12X48UR that we've stacked and wanted to use for a distribution layer. We utilize a lot of static routing to offset overlapping private networks we connect to. On issuing static routes, we seem to hit a limit of 16 on these...
Hi guys, just wonder which model of cisco C1100 series router support below criteria: - dual WAN RJ45 connection of 100Mbps each - PPPOE over vlan
Dear All, I just unpack my cisco ASR 903, and want to configure BGP but when i enter command router bgp xxxxx(ASN) the massage appear "Protocol not in this image" Show Version file is attached. Please Help BR Sajjad
Hey Cisco Forum, I'm running a lab for some routing simulations and have come across some weird route summarization that I can't work out an answer to. My lab looks like this (from a routing perspective at least): BGP1 (Palo Alto FW)---OSPF Pid120-...
Having what is likely a simple issue, but all day overwhelmed by it. New 2960x switch, configured out of the box using Express setup to an IP address of 192.168.4.16. Attempting to connect to a LAN interface (XO) on Sonicwall NSA3600. I can get a ...
