Routing

Hi Guys,I have a Juniper SSg350 workign as a Ipsec site to site VPN hub. I have multiple SSG20 and SRX110's out at remote sites which connect to the VPN and all are working well.recently I deployed two Ciscos, one 877 and one 878 and connected to the...

Hi Everyone,Have a customers site where there is an 881 and also a ME3400E - ME3400E currently only does L2.The customer is wanting to remove the 881, and have the ME3400E do all the L3 (And L2) functions - The ME is running metroipaccess (So can do ...

I have been working on a pretty big project for work for the past few months and  today I am getting errors when I try to open my project. Hopefully I did  not mess it up because I've spent so much time on this project and  deadlines is nearing. Hope...

OK.. have a website which resides in 10.10.102.2 I can access it from the internal network. Yet from the WAN I cannot. Now the interesting part is that the routers on the WAN connection can succesfully ping that address. The address it is trying to b...

Ok I have routerA routerBthen at another site routerC and RouterDAll can communicate via a network 192.168.101.0 255.255.255.0 without any problem. Using tunnels to communicate back and forth. RouterC can access 192.168.102.0  address but the Router ...

Hi Everyone,We have Juniper EX 4200 as core switch at two sites connected Cisco  2960s and Cisco 3560s (access layer switches). For even-numbered VLANs,  one Juniper switch is root bridge and for odd-numbered VLANs, other  Juniper switch is the root ...

Hi ,how we can check MPLS circuit are running fine or not .what are the commands to chek the configuration and if not working fine ?

Hi allIf I hosted an online internet site which I wanted to be access globally across multiple datacentres, how would I achieve this? would it be via DNS ? or some other load balancer? how would it work ?also I hear about anycast, how does this work?...

Team,Recently I participated to one of the Cisco partner briefing where they pitched iWAN design using internet as an alternate transport. With dual ISP connections, the increased SLA at reduced cost compare to MPLS. It leveraged DMVPN, WAAS, QoS, Pf...

Hello,We run BGP over our WAN and we group our BGP neighborships into VRFs. But I was looking at the BGP network statements and I noticed that those are not defined under a specific VRF, but rather under the ipv4 address family. But if a network belo...

Pls help

Hi guys,I have discovered weird routing from our ISP all related to BGP. Here is the scenario (real-one). - there is a /19 prefix bought about 10 years ago, which was registered with ARIN authority. - as bussiness grew each site got it /24.The troub...