Routing

Hi,I want to configure Read-Only and Read-Write String in Firewall 5520. I do not want to use default strings. Please help as I am not getting option for R-O & R-W strings with this model.

hi everyone,please i have an issue with my routers,from R2 i can telnet to R1 int serial 0/3/0:0 ip address,but i cannot telnet fron R1 to R2 int serial0/3/0:0 ip address.please what could be wrong attached are the configs.

Hi I have a problem with my Cisco router in which it drops the internet connection every morning at around the same time, Is there a command I can use that would resolve this issue?

Hi, I need to configure PBR on 2821 GE sub-interface, does anybody know the performance of this configuration? is it process switched or CEF switched?

Hi,We have one of our customer named IFFCO. They have facing problem that they won't able to access there remote server "10.1.1.13" from Regional branches like MUL R.O,HYD R.O but it can access from Factory router and from Vlan1 and Vlan2. I have att...

I have cisco 7609 router with sup 720 3cxl(RSP720-3CXL-GE).I need to check the memory on sup & no. of routes 720 will hold.Regards,

I have an issue configuring BGP between Cisco and Open BSD. it worked for cisco 2600 & Open BSD but cannot work for 1600 series. what could be the issue ?

I am working with a VPN tunnel between a Cisco 1710 (branch) and Cisco 2610 (HQ). The tunnel is UP, however, the branch is unable to browse to a site using internal IP hosted at HQ. There are other branch connections with Cisco 1710 routers that us...

Am getting huge broadcast in received broadcast data , but no infromation when enabelig storm control on broadcast ,can anybody help

Hi,Everytime I do a show run, wr mem or try to add a NAT statement, I get %NAT: System busy. Try later. I did the following but no luck:%NAT: System busy. Try later The %NAT: System busy. Try later error message appears when a show command related to...

Greetings all, Like the subject says I need an english translation of the following output. :) (Spefically the "load sharing elements" line) ROUTER A OUTPUTIP CEF with switching (Table Version 73), flags=0x0 23 routes, 0 reresolve, 0 unresolved (0 o...

Hello,Can any one explain the folowing situation:I have a router 2821 instaled on the network, when i issue a show arp on the router i see the folowing information:Protocol Address Age (min) Hardware Addr Type InterfaceInternet 10.211...

I have applied CBAC feature from SDM , now i am unable to access SDM from WAN plz let me know how to enable SDM access from WAN

Hi all-I would like to know if someone can provide me with information on how to monitor a port on a 6500 switch for throughput!Thanks in advance, sK

Hello,I've set up an ISDN line between a PRI on a 3845 running IOS c3845-ipbase-mz.124-3g.bin, and a BRI on 2811 running IOS c2800nm-advipservicesk9-mz.124-8d.bin. When testing (or pinging across) the ISDN from the 3845 the ISDN line comes up for a s...