Dear @I am experiencing an issue with VXLAN static ingress replication on a pair of Nexus switches running NX-OS 7.0(3)I7(2). The setup consists of two leaf switches (NX-6 and NX-7), where VLAN 100 is mapped to VNI 5000 on both switches. Each switch...
Forum Posts
Hi , I'm looking for help on the following issue, i'm CCNA certified since few month, and i have an issue on ISR4451-k9-RF, it seems that my customer is facing issue with IOS IP base, On product hasn't the same type of IOS, see attached screenshots ...
Hi All, am using the following topology for BGP testing , but am not able to establish bgp neighborships between R1/R3 and R2/R4. The sample config/output is mentioned below:- ****************************************************** R1#show ip bg...
Hi AllI am looking at configuring qos per tunnel on my dmvpn.I have a couple of questions.1.I assume the policy applies to the hub end only?2.As there is only 1 MGRE tunnel on the hub, how can multiple qos policies be applied?3.what about spoke to sp...
hello,I am facing with a big problem in my cisco switchI have cisco 6880 switch with an OSPF link to cisco switchesIt has been working fine for years and all of a suden the process went down, and is stuck in EXCHANGE/EXSTART statesI have another OSPF...
Hello Experts , I have a critical application traffic which passing though my Cisco ISR 4321 and i noticed that some packets being dropped as Taildrop , Please find below output from packet-trace debug : sh platform packet-trace summary | i Gi0/0/...
Hello, kindly i need your support as we connected GTM to discover global DNS from different two ISPs on two router each router have two VRFs, on first Router first VRF the main and second is the backup, on the second router the second VRF is the main...
Hello.I currently just got a Cisco 2821 with CallManager(8.6) installed and IOS(15.1M) and ADVENTERPRISE installed. It has 512MB of DRAM and 256MB of Compact Flash memory. This device will solely be used for VoIP.I was wondering if it would be enough...
Hi,I'm looking for a similar command in IOS to the "alias" command for PIX. I have a setup where my internal clients need to reach a web server in the DMZ. The DNS response is the outside (official) IP address of the web server. I would like the Rout...
Resolved! IS-IS Single topology vs Multitopology
Hi Guys, Can anyone explain to me in simple terms what the difference is between IS-IS single topology and multitopology? The documents available online are very confusing and conflicting, even cisco's. I have tried to simulate both on my labs and ca...
Hiany Free NMS software on linux of windows server Can monitor BGP session on Cisco routersFor example uptime prefix numbers and prefix addresesses ?for example X.X.X.X/24Y.Y.Y.Y/21How can Do this ??? by snmp ???
Hello.I've been reading the Datasheet for the Cisco 2821, and it says that the PDVM2-64 can be used on it. However, there are 3 PDVM slots available on the 2821. I was wondering if there is a limit as to how many of the PDVM2-64 can be put in the rou...
Hello, if I had 2 Data Centers, each connected via BGP to our MPLS WAN carrier network. This MPLS WAN carrier network also contains a number of remote sites also connected via BGP. We’d like to have the two DCs be layer 2 adjacent through the MPLS ...
Resolved! standard acl issue
Hi Team,Can you please help on one acl issue ?I have two devices connected A --- B (ios/ios-xe, issue on both) , having bgp neighbor ship. Device A is advertising 2.2.0.0/16 and 12.12.12.0/24 prefixes to device B using bgp. Device B has route-map app...
What is the throughput of the ISR4431-SEC/K9? We also want you to teach us about the standard bundled licenses.
