How to setup Cisco 890 true webinterface

[wesley]

Hi,

I have a Cisco 890 Router. But I lost the setup CD/DVD to configure my Cisco 890. Can somebody tell me
how I can access the webinterface or setup from this router. Or can I somewhere download the software?

Thx

[Julio E. Moisa]

Hi

You need to go to Windows device manager, then search the COM ports and if you have the drivers configured properly you will see the COM port (see image 1).

Once you have identify the COM port you can open putty, select Serial and set up the COM port (see image 2).

Please keep us posted.

:-) 

[wesley]

Julio Moisa,

that is what I do. Here my console cable is on COM3. Then I put the COM port in putty en there it stuck

[Julio E. Moisa]

Thanks, Nothing happens pressing enter keyboard?

[wesley]

I get this now when i press enter

[Julio E. Moisa · Accepted solution]

Hi

On that picture you are the privileged exec mode, now you can configure the router executing configure terminal

[wesley]

ok thx :-)

1. I want it in DHCP our change the routers ip en sub
2. How to activate wireless connection

[Julio E. Moisa]

Hi

If you want to create a DHCP scope you need to configure the following:

Example

ip dhcp pool MYDHCP
network 192.168.10.0 255.255.255.0
default-router 192.168.10.1
dns-server 8.8.8.8 4.2.2.2

ip dhcp excluded-address 192.168.10.1

In order to configure wireless on a router 891W, you need to follow this configuration:

http://www.cisco.com/en/US/docs/routers/access/800/880/software/configuration/guide/880_basic_device_wireless_config.html

:-)

[wesley]

Ok,

let me explain what i want to do.

1. I want to configure the Cisco Router as a Wireless Access Point
2. I have already a Wireless Modem on cable (here in Belgium it is Telenet)
3. That Telenet modem is on ip 192.168.0.1 (See attachement picture)
4. I have a second Wireless Access Point configured on IP 192.168.0.3
5. The networkcable i will connect will come on NetwerkInferface 0 port

I hope this explains a little bit better what I want to do with it :-)

Kind Regards

[Georg Pauwen]

Hello,

issue the command:

show run

and post the output. We can then fill in the necessary bits and pieces...

[wesley]

Hi,

hereby the pic that I get when running command "show run"

-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN
CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want
to use.

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------


User Access Verification

Username: Ncomrouter
Password:
% Password expiration warning.
-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

-----------------------------------------------------------------------

yourname#show running-config
Building configuration...

Current configuration : 5821 bytes
!
! Last configuration change at 08:54:45 UTC Sun Jun 18 2017 by cisco
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
!
!
service-module wlan-ap 0 bootimage autonomous
!

yourname#show
yourname#show running config
                         ^
% Invalid input detected at '^' marker.

yourname#show running-config
Building configuration...

Current configuration : 5821 bytes
!
! Last configuration change at 08:54:45 UTC Sun Jun 18 2017 by cisco
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
!
!
service-module wlan-ap 0 bootimage autonomous
!
crypto pki trustpoint TP-self-signed-2097789431
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-2097789431
 revocation-check none
 rsakeypair TP-self-signed-2097789431
!
!
crypto pki certificate chain TP-self-signed-2097789431
 certificate self-signed 01
  3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
  31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 32303937 37383934 3331301E 170D3137 30363137 32313438
  35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
  4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 30393737
  38393433 3130819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
  8100BBCC 2877A414 B4105732 AFA48E9B E05FD1C5 52A5433E 8438AA58 7BE2BAB6
  BC1B8736 E795C345 D4B78B5E 9D29062F 8F35A6B2 3A5A8ECA F6BBD61A 1709B280
  3C0A2B50 F121CC58 FF9BB701 CEFC6E52 C85CDF75 D57FF2B5 4423567C 7590456C
  D0ED7034 D1CE74C0 EB0F69AD 018CF197 3AC682E9 F7A10ACE 3FE96CB0 3A135F6C
  68F50203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
  551D1104 1B301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D
  301F0603 551D2304 18301680 14F87BA4 934C5CC7 6AD0BCF6 C8709E1E 9F269B46
  2F301D06 03551D0E 04160414 F87BA493 4C5CC76A D0BCF6C8 709E1E9F 269B462F
  300D0609 2A864886 F70D0101 04050003 81810066 68458D96 886C2DFB 7A1B8E55
  BB8160A0 D40CD9D7 C287CA21 A628CAC9 1DF2A4CD D2B19F01 FFB8C9FA 295C7B8D
  E6613DB7 D88DAF73 4D1670C1 8F345D5C B5CBD4F1 B9304EDF 47C32C20 1407846E
  FCF539CF 9BC3E9BA 9AE63CAB B83FF245 0228B640 C9E4FBE5 F42B9216 BAABA1EB
  C9C5081B 3D44D7F7 F7807339 94715C6C AE7B23
        quit
ip source-route
!
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
   import all
   network 10.10.10.0 255.255.255.248
   default-router 10.10.10.1
   lease 0 2
!
ip dhcp pool MYDHCP
   network 192.168.0.0 255.255.255.0
!
!
ip cef
no ip domain lookup
ip domain name yourdomain.com
no ipv6 cef
!
!
multilink bundle-name authenticated
license udi pid CISCO892W-AGN-E-K9 sn FCZ1449C36P
!
!
username Ncomrouter privilege 15 secret 5 $1$zwxS$06dvG4X/4yU.O6CnlynZI.
!
!
!
!
!
!
!
!
!
interface BRI0
 no ip address
 encapsulation hdlc
 shutdown
 isdn termination multidrop
 !
!
interface FastEthernet0
 !
!
interface FastEthernet1
 !
!
interface FastEthernet2
 !
!
interface FastEthernet3
 !
!
interface FastEthernet4
 !
!
interface FastEthernet5
 !
!
interface FastEthernet6
 !
!
interface FastEthernet7
 !
!
interface FastEthernet8
 no ip address
 duplex auto
 speed auto
 !
!
interface GigabitEthernet0
 no ip address
 shutdown
 duplex auto
 speed auto
 !
!
interface wlan-ap0
 description Service module interface to manage the embedded AP
 ip unnumbered Vlan1
 arp timeout 0
 !
!
interface Wlan-GigabitEthernet0
 description Internal switch interface connecting to the embedded AP
 !
!
interface Vlan1
 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$
 ip address 10.10.10.1 255.255.255.248
 ip tcp adjust-mss 1452
 !
!
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
!
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run

!
!
!
!
!
!
control-plane
 !
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN
CREDENTIALS


Here are the Cisco IOS commands.


username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco


Replace <myuser> and <mypassword> with the username and password you want
to use.


IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------
^C
!
line con 0
 login local
line 2
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output pad telnet rlogin udptn ssh
line aux 0
line vty 0 4
 access-class 23 in
 privilege level 15
 login local
 transport input telnet ssh
line vty 5 15
 access-class 23 in
 privilege level 15
 login local
 transport input telnet ssh
!
scheduler max-task-time 5000
end

[Julio E. Moisa]

Hi

Could you please provide a: show version

Thank you in advance. 

[wesley]

Hi

here you go :-)

-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.

YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN
CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want
to use.

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.

For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
-----------------------------------------------------------------------


User Access Verification

Username: Ncomrouter
Password:
% Password expiration warning.
-----------------------------------------------------------------------

Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for  one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

-----------------------------------------------------------------------

yourname#show version
Cisco IOS Software, C890 Software (C890-UNIVERSALK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Fri 29-Oct-10 00:19 by prod_rel_team

ROM: System Bootstrap, Version 12.4(22r)YB3, RELEASE SOFTWARE (fc1)

yourname uptime is 16 hours, 47 minutes
System returned to ROM by power-on
System image file is "flash:c890-universalk9-mz.150-1.M4.bin"
Last reload type: Normal Reload


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 892 (MPC8300) processor (revision 1.0) with 498688K/25600K bytes of memory.
Processor board ID FCZ1449C36P

9 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 ISDN Basic Rate interface
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Embedded AP (s)
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        CISCO892W-AGN-E-K9    FCZ1449C36P



License Information for 'c890'
    License Level: advipservices   Type: Permanent
    Next reboot license Level: advipservices


Configuration register is 0x2102

[Georg Pauwen]

Can you post a schematic drawing of your setup including IP addressing ? That would make it easier to make a recommendation...

That said, to be on the safe side, I would configure a different subnet for the Cisco. So, instead of 192.168.0.0/24, use 192.168.2.0/24 for the Cisco. The configuration would look like this:

version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname yourname
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
service-module wlan-ap 0 bootimage autonomous
!
crypto pki trustpoint TP-self-signed-2097789431
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2097789431
revocation-check none
rsakeypair TP-self-signed-2097789431
!
crypto pki certificate chain TP-self-signed-2097789431
certificate self-signed 01
3082024F 308201B8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32303937 37383934 3331301E 170D3137 30363137 32313438
35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 30393737
38393433 3130819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100BBCC 2877A414 B4105732 AFA48E9B E05FD1C5 52A5433E 8438AA58 7BE2BAB6
BC1B8736 E795C345 D4B78B5E 9D29062F 8F35A6B2 3A5A8ECA F6BBD61A 1709B280
3C0A2B50 F121CC58 FF9BB701 CEFC6E52 C85CDF75 D57FF2B5 4423567C 7590456C
D0ED7034 D1CE74C0 EB0F69AD 018CF197 3AC682E9 F7A10ACE 3FE96CB0 3A135F6C
68F50203 010001A3 77307530 0F060355 1D130101 FF040530 030101FF 30220603
551D1104 1B301982 17796F75 726E616D 652E796F 7572646F 6D61696E 2E636F6D
301F0603 551D2304 18301680 14F87BA4 934C5CC7 6AD0BCF6 C8709E1E 9F269B46
2F301D06 03551D0E 04160414 F87BA493 4C5CC76A D0BCF6C8 709E1E9F 269B462F
300D0609 2A864886 F70D0101 04050003 81810066 68458D96 886C2DFB 7A1B8E55
BB8160A0 D40CD9D7 C287CA21 A628CAC9 1DF2A4CD D2B19F01 FFB8C9FA 295C7B8D
E6613DB7 D88DAF73 4D1670C1 8F345D5C B5CBD4F1 B9304EDF 47C32C20 1407846E
FCF539CF 9BC3E9BA 9AE63CAB B83FF245 0228B640 C9E4FBE5 F42B9216 BAABA1EB
C9C5081B 3D44D7F7 F7807339 94715C6C AE7B23
quit
ip source-route
!
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.2.1
!
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
lease 0 2
!
ip dhcp pool MYDHCP_WIRELESS
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
!
ip cef
no ip domain lookup
ip domain name yourdomain.com
no ipv6 cef
!
multilink bundle-name authenticated
license udi pid CISCO892W-AGN-E-K9 sn FCZ1449C36P
!
username Ncomrouter privilege 15 secret 5 $1$zwxS$06dvG4X/4yU.O6CnlynZI.
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
isdn termination multidrop
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
interface FastEthernet6
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
duplex auto
speed auto
!
!
interface GigabitEthernet0
no ip address
shutdown
duplex auto
speed auto
!
!
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan2
arp timeout 0
!
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport trunk native vlan 2
switchport mode trunk
!
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$
ip address 10.10.10.1 255.255.255.248
ip tcp adjust-mss 1452
!
interface Vlan2
ip address 192.168.2.1 255.255.255.0
!
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 23 permit 10.10.10.0 0.0.0.7
no cdp run
bridge 1 protocol ieee
bridge 1 route ip

Then, configure the AP Module by typing:

yourname# service-module wlan-ap0 session

and configure the below:

hostname ap
!
enable secret 5 $1$uoRD$Mz7Q8NVh9L0PYSoIKxghH/
!
no aaa new-model
!
dot11 ssid YOURSSID
vlan 2
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 cisco123
!
username cisco privilege 15 secret 5 $1$JbKq$341Z9uDAkeHKcMTO6/WI00
!
bridge irb
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption vlan 2 mode ciphers tkip
!
ssid YOURSSID
!
station-role root
!
interface Dot11Radio0.2
encapsulation dot1Q 2 native
!
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router

no ip address
no ip route-cache
!
interface GigabitEthernet0.2
encapsulation dot1Q 2 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address dhcp
no ip route-cache
!
ip default-gateway 192.168.2.1
!
ip http server
no ip http secure-server
!
bridge 1 protocol ieee
bridge 1 route ip

[wesley]

Hi,

I will make a drawing of the setup I now have and will post it here then

Kind Regards

[Georg Pauwen]

I have Teamviewer installed, I think I need your Partner ID ?