09-10-2018 08:05 PM - edited 03-05-2019 10:54 AM
I need design assistance with bgp & ospf.
1. site-2 should use green link as primary to reach site-1 and red link as back to reach site-1.
2. site-3 should use its green link as primary to reach site-1.
3. site-2 and site-3 use their directly connected link as primary to reach each other and traverse through site-1 to reach other if site-2 <-> site-3 links fail.
4. sd-wan should be used as tertiary. i.e. if site-1 and site-2's links to site-1 fails then they should use sd-wan to reach site-1?
how to accomplish this without causing any loops?
09-11-2018 04:11 AM
could someone assist please.
09-11-2018 07:28 AM
09-11-2018 08:27 AM
Instead of iBGP you can run OSPF and do mutual redistribution between BGP and OSPF at the edge. You can use route aggregation and filtering for the received and advertised routes
09-11-2018 03:42 PM
Hire a consultant.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide