10-09-2019 02:48 PM
Hi All,
I have just one simple question. We are planning to buy Cisco 550X and would like to know if it is capable of EIGRP routing? I checked with its datasheet and it did not mention about EIGRP unlike other cisco l2/l3 switches. Many thanks in advance...
Solved! Go to Solution.
10-09-2019 02:55 PM
Hello,
unfortunately it does not support EIGRP. It only supports RIPv2. Check Table 1 in the datasheet linked below...
10-09-2019 02:56 PM
As per the document it does not support any other IGP, except RIP .
10-09-2019 10:49 PM
Hi,
It will not support EIGRP. You can work with RIP2
10-09-2019 02:55 PM
Hello,
unfortunately it does not support EIGRP. It only supports RIPv2. Check Table 1 in the datasheet linked below...
10-09-2019 02:56 PM
As per the document it does not support any other IGP, except RIP .
10-09-2019 10:49 PM
Hi,
It will not support EIGRP. You can work with RIP2
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide