Server Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

http://www.tallsoft.com/cdpmonitor.htmCisco CDP Monitor is a CDP agent for windows host, with it you can monitor all connective Cisco devices .and you can also discover all the connected computers by a simple command of "show cdp neighbors" in Cisco ...

MicCaraway by Community Member
  • 599 Views
  • 1 replies
  • 0 Helpful votes

Hi,I have two Catalyst 6509 switches that connect to different OSA adapters. The mainframe LPAR's connect to each other via CTC.The OSA's are there to back each other up and I have static routes to the respective LPAR's as well as backup static route...

deanyoung by Level 3
  • 1115 Views
  • 4 replies
  • 0 Helpful votes

I am having problems with configuring speed on uplink ports on cisco blade switches (Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class). I can configure fixed speed on uplink ports (Gi0/19-22) but after reload I am getting message that ...

Hello friends,We have a topology of Cat5e cabling installed at the data centre, now we are working to upgrade main switches to 6500 series and we want to run gigabit connection through copper. Does Cat5e support Gigabit connection or we need to insta...

paltel by Level 5
  • 1229 Views
  • 6 replies
  • 0 Helpful votes

Currently CAT6509 power supply is running 120VAC, people plan changing to 240VAC to get more power and install another blade X6316-GE-TX, can somebody to confirm this?-----------------More--2006 Mar 05 17:25:14 %SYS-5-SYS_INSUFFPWR:Insufficient power...

richardfu by Level 4
  • 918 Views
  • 4 replies
  • 0 Helpful votes

Hi, one of our customer is running Cisco 6509-NEB chassis with dual fan-mod. Now we've some testing need to be done to POC the new IOS having no issue. I found a vendor that is able to loan us a Cisco 6509 chassic (not NEB version though) with a Sup7...

cnadvisers by Community Member
  • 2052 Views
  • 7 replies
  • 0 Helpful votes

I have a 6509 chassis w/1 Sup720 and dual 3000W power supplies. When I power it on it runs for about 3-5 minutes and the power supplies shutdown. The red "Output Failure" light comes on. They are connected to 110V/20Amp circuits. These are the same c...

david.chinea by Community Member
  • 1162 Views
  • 3 replies
  • 0 Helpful votes