07-26-2018 11:31 AM
I have a customer who is showing two serials covered in CCW-R, but not in SNTC portal. It is also recognizing the PID as different in CCW-R vs SNTC. It was recommended, we should report this to the community so it can be treated as a bug, and provide a suitable workaround.
There are 2 things going on here…
So in summary, we have 2 chassis in a bundled SKU for which the SNTC portal (SNAS) is not matching the correct PID, to the actual PID that is covered [in CCW-R]. This means the portal cannot determine that the devices are actually covered. I have attached a screen shot.
07-27-2018 10:16 AM
Hi There!
SNTC will give preference to collected information over CCW-R whenever collected information is available.
You should however still be able to see CCW-R PID (Contract PID) under Covered/Not Covered Report.
For further troubleshooting, it would be great if you can share customer and inventory details along with sample serial numbers.
You may send these details via private message.
Regards,
Suchita
07-27-2018 11:36 AM
07-30-2018 12:40 PM
There appears to be issue in the system due to which SNTC portal is not able to pull contract details from CCW-R. I am working on the issue and will get back as soon as we have further details available on the fix.
Regards,
Suchita
08-21-2018 10:42 AM
08-27-2018 02:17 PM
Hello Krysten,
My apologies for the delay. Your issue regarding missing contract from Portal is still being worked upon by our Engineering Team. A new bug CSCvm15841 has been opened to track the issue further.
Regards,
Suchita
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide