Storage Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Hi all, first time poster here looking for some direction on a config.We upgraded a 9148S from 8.3(2a) to 9.3(2) - latest supported version and after the upgrade I noticed a few ports that before had the Trunk On.fc1/1 is upPort description is client...

admindude by Level 1
  • 486 Views
  • 2 replies
  • 0 Helpful votes

Hi all, My customer is merging Fabrics and i can see default  VSAN 1 left without any ports. i would like to suspend all VSAN 1 in all fabrics as unless i need to get them unique Domain IDs or VSAN1 stays segmented right in case if there are any conf...

Hello there,i am planning to use the "Image Managment" feature to update MDS 9148s switches. When i try to stage the files the systems says that i dont have enougth space on the bootflash indicated by the red numberWhen i run the staging process it f...

noc_0-1706276937515.png noc_1-1706276986417.png noc_2-1706277059185.png noc_3-1706277244732.png
noc by Level 1
  • 114 Views
  • 0 replies
  • 0 Helpful votes

Hy! I have Cisco SAN switch (DS-C9132T-K9). I created some zone for the standalone servers and storage. And also create zones for my blade and storage. I have 3 blade server: ESX1 pwwn: 50:01:43:80:02:a4:90:00 ESX2 pwwn: 50:01:43:80:02:a4:90:04 ESX3 ...

Hello All,Happy new and hope all good. Any help much appreciated.In short DNCM 11.3(1) root password forgotten and we need to upgrade to 11.5(4)We have DCNM version 11.3(1) and can't discover new mds 9148Ts. We were advised to go to 11.5(4) to discov...

Mates,I have some hosts that are zoned with a storage array. Historically we were segregating Linux / Solaris or AIX hosts in different VSAN. But as we only have a few hosts now and not a lot of port group in our new storage array, we would like to h...

Cedric73 by Level 1
  • 404 Views
  • 3 replies
  • 0 Helpful votes