I trying to connect a Fiber using a Media converter so the connectivity its like this Switch (Fiber) ---- (Fiber)Media Converter(Copper) --- (Copper)Switch I have activity in the Fiber side of the media converter but not in the switch (Fiber). ...
Hi all, How do I setup a PVLAN between two Cisco ME 1200 switches...Below is the attached network topology...
Trying to figure out what traffic would be tagged in this scenario. Let's say I have two switches trunked together with the native VLAN as 99. I also have some other VLANs configured (10,11) SW1 802.1q trunk running PVST+ SW2 802.1Q trunk running...
Hey, I am trying to setup ASA clustering. I need to setup port-channels between the ASA and the switch on both the inside and outside of the ASA. The clustering works alright on the ASA. The master and the slave come up perfectly. But when I ad...
I can't seem to find any information on the Nexus 5000 support of netflow. I assume that means it doesn't do netflow, but I just wanted to see if anyone could confirm one way or another.Thanks,Joe
Hello,We have this network , where access points are all connected via a smallnon-cisco basic switch(in a workshop enviornment) which only seems to have basic vlan & port setting.these small switches are linked to a cisco switch , cisco end port is a...
I bought IE-2000U-8TC-G last year. They came with ios 15.2(4) EA8 and support PTP. This year I got a smaller application. So I bought IE-2000U-4TS-G which came with only 4 ports and same ios 15.2(4) EA8. However, I found that the 4TS-G doesn't suppor...
Hello, I have 7 switch 3850. the cold start time of the stack is from 7 minutes to 10 minutes (different firmware). is it possible to reduce the load time of the switches to 5 minutes (technical requirements)? Thanks.
I own a Cisco switch that was given to me for free from a company that didn't need it anymore. I have set it up at home and it's software version is outdated. I have no way of registering with an "address" or any company based things as I am unemploy...
With Vivek Baveja and Shawn WargoWelcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Catalyst 6800 VSS Quad-Sup SSO and Instant Access with Cisco experts Vivek Baveja and Shawn W...
Good Morning, I have 2 sites that we are going to merge into 1. I am not to concerned about IP Scheme as neither site has over lapping addresses. Site 1 10.32.24.0/21 Site 2 10.32.32.0/21 My concern is Vlans, both sites use the same vlan numbers...
We use an active/active configuration for our MSTP where instance 1 odd vlans is set with a lower priority on one core switch (making it the root bridge for odd vlans) and instance 2 for our even vlans is configured with a lower priority on the other...
Hi, It appears I broke my network. There is a server VLAN and workstations VLAN. There is one desktop that is on the server VLAN and it can login and do all the DNS record checks using nslookup that "claim" everything is OK. Nothing on the workst...
Hello Cisco Community, I am trying to design a network, so I would like to check few thing with you. First of all, is the attached design legitimate? Would this work? Are those port-channels correct? Should I create a port-channel for downstream devi...
Recently purchased 3850 12 port switch to replace a cisco 3750 12 port. This switch connects all the other buildings. Each building has a 3750 switch. I've configured the 3850 vlans, etc as the 3750 switch. Will there be a issue for the 3850 switch c...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-23-2025 01:45 PM | ||
| 07-08-2025 11:44 PM | ||
| 07-04-2025 02:13 AM | ||
| 06-26-2025 10:05 AM | ||
| 06-16-2025 07:47 PM |
| User | Count |
|---|---|
| 12 | |
| 11 | |
| 7 | |
| 4 | |
| 3 |
