Switching

We have recently deployed Nexus 5k along with Fiber extenders N2k. Problem that we are having is that N2k does not support 10/100, as well as does not allowed BPDU on its ports meaning we cannot even connect any other switch to make our 10/100 NICs f...

Has anyone come  across any CSS problems with HTTP post form payload size?We hit one vip that sends us to proxy servers and then to another vip for the physical servers.Recently a release has gone out with updates a http form and now we are getting i...

Ok..so I seem to have the TAC befuddled so I'm going to come here as well.I have a 6509 with a CSM blade and a SSL-M blade installed.  The CSM is configured and working properly in a one-arm mode and we are tring to get the SSL-M integrated into the ...

Hi,     I understnad that when ingress replication is used, multicast packet are replicated when they enters the switch.  In VSS enviroment, it is likely multiple copy of multicast have to travel across VSL link.  Question i have is: if i have dual-h...

Does anyone have any experience with these HWICs? We are currently field testing one in a 1841 as a primary connection for a small (1 user) remote site. I am experiencing 2 issues:1. Time to acquire a signalEvery now and then the signal will just dro...

Hi, folks:This is the QoS configuration that is applied to some of the server interfaces on an access layer 6509 running 12(2)SXF18.interface GigabitEthernet8/3 description Bowers VMWARE 1 switchport switchport access vlan 752 switchport mode access ...

I have a question regarding design considerations. Can someone with personal experience please help me with this?Lets say I have a centralized location that must connect to many remote sites - a hub and spoke kind of architecture. The hub will be loc...

I have a above switch with redundant power supplies in Bay 1 and 2.  The status indicator is green on the supervisor module, but turns amber when we shutdown one of the power supplies.  The switch functions fine with only 1 power supply, but wonderin...

Hi,despite that there isn't any bug reported for memory leak in the 12.2(50)SE3, someone have experienced this issue?Thank you.Best regards,

Is there any savvy guys/gals out there that can answer a question for me.I'm looking to purchase some Nexus switches. Our infrastructure cabinets are APC with the following model PDU:APC Rack PDU, Metered, Zero U, 30A, 200/208V, (20)C13 & (4)C19I ca...

My production setup involves a 3560 connected to a 4506 via routed fiber ports on both devices.  The 4506 is throwing EIGRP neighbor not on common subnet from that interface.  The address that is showing is from an SVI on the 3560.  I was able to rep...