Switching

When I associate a interface vlan of a Cat6509 to a bridge-group, local switch cannot see through hsrp the partnet switch. Bridge-group is neccessary because we need dlsw+.

HiI have a couple of 3130 switches in the back of a Dell blade M1000 chassis that has been stacked, so that I can provide lacp channel groups to the servers within the blade centre.The blade servers are SLES10, running Novell Cluster Services.The bon...

Hi All, is there any best practice to analyze LAN environement as well as tools. Our client complains about LAN getting slow down during the day. we need to analyze to see what cause the problem. If there is any best practices or tools available, I'l...

Greeting,Can anyone point me towards on side-by-side comparison of the 2960 and the 3560E and list the main differences in layman terms. Our vendor is recommending replacing all our edge switches (2960) with 3560E because of their better POE for our ...

Please help .I have 2841 router but unfortunately when turn on router ,prompt goes to romon mode.After changing confreg 0x2102 & rebooting the router ,router does not come to normal.Show flash' does not contain any output on the flash.Please help me ...

how i can configure vtp client in switch catalyst express 520 ?.i need connect the switch catalyst express to switch catalyt 4500, will be cool automatic sharing vlans.

I wanted to gather a consensus of the recommended best-practice steps for upgrading (2) 6513s core chassis units running IOS with dual-720s in each. Need to upgrade to add additional support for WS-X6708-10G-3C (10Gb line cards) The card requires 12....

Hello Everyone,on a layer 2 switch cluster of 3560s without a management VLAN IP address should I be able to ping devices connected to the switch? Devices can ping each other but I can't get a ping response with I try to ping anything from the switc...

Posted by: dipakpvaghela - Network Specialist, Tata Consultancy Services Ltd. Jul 30, 2009, 7:38am PSTHi all, Please help me to enable natting. We are using Firewall in between DMZ and internet. No my firewall crash and will bypass it. Now i wants to...

Hello Everyone,we have a Windows 2008 server that has a primary and secondary IP address on it. Each IP address actually belongs to a different VLAN. The NIC is a virtual NIC from 2 teamed NICs. The server team put routers on the server to allow i...

Hi,In an environment where it is very difficult to get downtime for maintenance/software upgrades. Today on 6500 Sup2 performing an OS upgrade means a switch reset. Realise we would need to move to new platform/supervisor to get full benefits of ISSU...