Switching

Hi, How can I give someone read-only access to mainly 2950 switches. It would be great, if they can surf to the switch with a readonly level. Already saw some config with http://ip_address/level/7/ but I was still asked for a level 15 uid + pwd. Rega...

Greetings,I've deployed EIGRP on two routers connected to a wireless bridge over Ethernet. Periodically, the hold time expires and drops the connection for a few minutes. Here is the log of this activity.Mar 13 16:47:55.663: %DUAL-5-NBRCHANGE: IP-E...

Does anybody know of a rate limitation on span traffic in the 3750? I have a customer that is using a 3750 to mirror call center traffic for monitoring and no matter what they do, they cannot seem to get more than 1850pps out of the span port. I ha...

hi can you seeeeeeeeee

While trying to upgrade IOS for Cisco 6513 with SUP 720 IOS ver 12.2(17d)SXB11 to 12.2(18) the IOS upgrade got failed and now I am getting rommon menu. The Switch is not booting and i am getting follwoing erroropen(): Open Error = -9loadprog: error -...

hi all,can anyone pls tell me the command to make anyother vlan as "native vlan" other than the default vlan 1 in catalyst 2948G-GE-TX switch.cheerio,Sathish

I have 1 Cisco 2950 (switch A)linked to an HP switch (switch B) which is itself cascaded to a Cisco 2950 (switch C). I have added ip addresses on the 2 cisco switches in VLAN1. Now, switch A can't find B. The linked in on interface F0/1 on A and on p...

r1----(G1)6509(VLAN10)------computeri config acl (deny any any)apply to interface vlan10 on 6509, whatever in or out, I found i can ping vlan 10 interface ip address from R1.But i can't ping vlan 10 interface ip address in 6509.how can i config acl t...

Hi all, I have an issue, we just moved into a new office and for its benefits we configured the 7 floors as separate vlans 10.0.10.0; 10.0.11.0 etc. The uplinks from the floors connect to a 2950 switch at the central data centre and a dot1q trunk por...

Hell All,I have mail server running behind the PIX Firewall, i fount that mail server is running well inside the network, but while sending mail from GMAIL ot YAHOO or any other mail server to my mail server, its dosent work. and our mail server isnt...

Guys,Is there a way i can implement port-security across my distribution switches such that it will disable a particular port should a user decide to plug in an authorized access-point?Thanks!

I have about 40 people in our office, some wired and some wireless. We are currently using a Linksys BEFSR41 router but our connection to the internet is always intermittent, and it has been replaced twice already. I would like to get a more reliabl...

I have a 4507 running as my main VLAN server with my switches setup to talk to them. The system was built and put into place, the vlans got pushed out to the switches like they should have. I made a couple new vlans and now I find they are not being ...