11-14-2008 08:26 PM - edited 03-06-2019 02:30 AM
hi every body!
if we configure the switchport as access port , should we disable the dtp to save unnecessary dtp messages on access port?
or configuring port as access port automatically disable the dtp?
thanks a lot!
Solved! Go to Solution.
11-14-2008 09:35 PM
configuring port as access port automatically disable the dtp?
Bingo.
__
Edison.
11-15-2008 05:16 AM
For any user port use the "switchport host" command which shuts off trunking and etherchannel negotiation and enables portfast.
11-14-2008 09:35 PM
configuring port as access port automatically disable the dtp?
Bingo.
__
Edison.
11-14-2008 11:27 PM
Hi,
Adding to Edison's post, DTP is point to point protocol negotiate trunking between 2 switches end points.
Quick note: DTP is not performed when switches have different VTP domain names.
HTH
Mohamed
11-15-2008 05:16 AM
For any user port use the "switchport host" command which shuts off trunking and etherchannel negotiation and enables portfast.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide