enabling multicast routing 3750
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2007 08:12 AM - edited 03-05-2019 05:32 PM
hi all
i am trying to enable multicasat routing on a 3750 switch
one port is configured as a routing interface with ip address
according to cisco site it should just be a case of entering 'ip multicast-routing distributed' followed by ip pim config.
unfortunately the 'ip multicast-routing' command is not available.
my switch is running ipbase-mz.122-25.SEE2
can anyone please help?
thanks in advance
- Labels:
-
Other Switching
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2007 08:21 AM
Believe you might need the IP Service image to obtain multicast routing support.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-30-2007 01:53 AM
Many thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-27-2007 08:23 AM
You need this image for multicast routing, c3750-ipservicesk9-mz.122-25.SEE2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
07-30-2007 01:53 AM
Many thanks
