12-16-2011 08:16 AM - edited 03-07-2019 03:55 AM
We have an ESW540 at a customer site that I need to know the best way to disable totally all port security. The default config blocks more than 3 computers from passing which breaks things like WAPs but also servers with dozens of IPs. They're running firmware 2.1.19 and just need this switch to act like it's basically a run-of-the-mill switch without it blocking connections to/from it. Thanks...
12-16-2011 10:54 AM
you have to set all the ports to type access point instead of host in the web interface.
Sent from Cisco Technical Support iPhone App
08-17-2012 04:47 PM
I have the same problem but need to have VLAN 3 and VLAN 4 tagged on AP points. If I set to host it only allows 1 VLAN.
08-17-2012 06:01 PM
Hi guys, you need to specify the smart port roles.
-Tom
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide