09-04-2018 06:17 PM - edited 03-08-2019 04:04 PM
I need to change my ring topology using rep.
Problem with dhcp in client's ring structure
client has a ring topology
client has a ring topology, when we disconnect one side of the ring the dhcp does not work on some machines.
follows the attached image.
by default it locks a port Gi1/0/2 using rep, it is possible for us to define which port we want to block automatically, eg I want to lock gate gi1 / 0/2 of the LDA-COI-SWC126 switch
Solved! Go to Solution.
09-15-2018 07:09 PM
It's solved, with the commands bellow, in the edge primary port.
interface TenGigabitEthernet1/2
description LDA-SILOS1-SWC134
switchport mode trunk
rep segment 1 edge primary
rep preempt delay 15
rep block port id 00200059DCA1B680 vlan 1-4094
ip dhcp snooping trust
09-05-2018 08:58 AM
09-05-2018 11:23 AM
09-05-2018 11:24 AM
09-05-2018 11:24 AM
09-15-2018 07:09 PM
It's solved, with the commands bellow, in the edge primary port.
interface TenGigabitEthernet1/2
description LDA-SILOS1-SWC134
switchport mode trunk
rep segment 1 edge primary
rep preempt delay 15
rep block port id 00200059DCA1B680 vlan 1-4094
ip dhcp snooping trust
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide