03-11-2021 08:32 AM
Hello,
I am planning to procure couple of switches for our new office.
On Access layer, I will have C9300 8 switches stack (6Nos. C9300-48P-A & 2Nos C9300-48UXM-A). I am also considering C9300-NM-2Y (2x25G SFP ports) uplink module in each C9300-48UXM switch.
On Distribution/Core layer, I will have 2Nos. C9500-24YAC-A switches run in SVL.
So the question is,
1. for connectivity between Access and Core, I am wondering if using 4 port 25G etherchannel ( 2x25G ports on uplink module in each C9300-48UXM) connecting to both C9300 switches in cross function, will work?
2. On C9500-24YAC-A, can I do SVL on 2x100G fixed ports but DAD on 2/25G fixed ports in each switch?
Please advise.
03-11-2021 09:19 AM
Breejesh,
To answer your questions:
1. Yes, you can have a 4-port Multi-Chassis EtherChannel from Access to Core.
2. Please reference https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/17-3/configuration_guide/ha/b_173_ha_9500_cg/configuring_cisco_stackwise_virtual.html for DAD configuration options and limitations.
Cheers,
Scott Hodgdon
Senior Technical Marketing Engineer
Enterprise Networking and Cloud Group
03-11-2021 10:24 PM
Thanks for responding Scott. I will go with 100G fixed ports for SVL and 10G fixed ports for DAD, on C9500-24YAC-A.
03-11-2021 11:00 AM
1. for connectivity between Access and Core, I am wondering if using 4 port 25G etherchannel ( 2x25G ports on uplink module in each C9300-48UXM) connecting to both C9300 switches in cross-function, will work?
- This will work as expected
2. On C9500-24YAC-A, can I do SVL on 2x100G fixed ports but DAD on 2/25G fixed ports in each switch?
- personally i do not waste 100G ports for SVL - 10GB good enough (not sure how big is this network? do you really need 10GB ports here ?
- DAD any small link is good enough for my personal suggestion.
03-11-2021 10:27 PM
Thanks for responding Balaji. The network is not too big but at the same time, I do not have any use of 100G other than SVL. So, I will go with 100G fixed ports for SVL and 10G fixed ports for DAD, on C9500-24YAC-A. Sounds good?
03-12-2021 01:45 AM
Sure - if that is your Intention to deploy. i do not see any issue.
make sure you also understand what @Scott Hodgdon advised the document "Restrictions for Cisco StackWise Virtual"
03-15-2021 03:46 AM
Yeah.
I will have right licences in place. Will not be using breakout or QSA cables. All I am going to use are Cisco QSFP-100G-AOC1M= & Cisco SFP-H10GB-CU2M direct attach cables for SVL and DAD links.
03-16-2021 03:53 AM
you should be good technically..let us know how it goes, all good close off.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide