Switching

Hi, Anyone knows if IE 1000 supports REP? I read through the IE1000 manuals and it doesn't have any information on it. thank you for your time in advance!-tom 

This switch was part of a stock of two switches. one day this switch failed and start rebooting I quickly remove the switch and replace it with a new one.Now am trying to recover this switch. Some of what I have tried1.   copy the .bin file to a USB ...

2960xas long i understand netflow lite collects sampled trafficip flow monitor MyFlow_monitor inputvsip flow monitor MyFlow_monitor sampler xy inputwhat's the difference between the 2? is a default sampler used in the first version? c1111which suppor...

I apologize for having an elementary understanding of networking but please help me out if you get the chance.  I currently have three L2/3 Cisco 2960's in three separate data racks that are housing amplifiers and and other public address equipment. ...

I have a Cisco Nexus 5672UP that is currently running v7.1(0)N1(1b) of the OS. Is there a version that I have to upgrade to first before upgrading to the latest and greatest? Also, is it non-disruptive at all or will a switch reboot be required?

hello all,  I have a cisco switch and I need to connect authentication by windows radius server 2019, I configure the server and try to enable aaa in the switch. I type  aaa new-modelradius server .....only this commend after reconnect to switch I se...

Hello Experts; I am planning to implement a 6509 switch with two supervisor cards, each supervisor card has two 10Gig ports, I like to know if the 10Gig ports on both supervisor cards are operational and can be used even one of the supervisor card is...

Hi all, i want to protect my recursive DNS server (unbound) that is connected to routed interface on switch. I applyed this ACL rule as output, but the resolving on server stopped resolving after few seconds. The connection to server and ping to inte...

I am trying to configure my ASA firewall to allow connections between its interfaces on different security levels using NAT exemption. I am familiar how to accomplish this via pre-8.3 code but I am confused trying to get a new firewall working using ...

Hi community , if I connect server with 10G  Rj45 port( Dell QLogic 57800 2x10GB  + 2x1Gb)  to  c9300 mGig  port Can I get 10G speed  with Rj45? or  mGig port just for connect with wireless devices BR, 

I have a question regarding Spanning Tree Root.I work in a Call Center, this organization uses Cisco Switches to manage their infrastructure; some clients made a hybrid topology (uses Call Center L2 switches to connect end users but made a connection...