01-10-2022 06:06 AM
I have two switch C9300-48T on stack, now i need add other Switch memeber 3
My question is when i add switch member 3 is need a restart for the two switch en production
Solved! Go to Solution.
01-10-2022 02:14 PM
@khalilsoltani47714 wrote:
I have two switch C9300-48T on stack, now i need add other Switch memeber 3
My question is when i add switch member 3 is need a restart for the two switch en production
01-10-2022 06:14 AM
Hi,
You should not need to restart the other switches. Follow the link below for adding a switch member to a stack
HTH
01-10-2022 06:23 AM
thank you @Reza Sharifi
I read this article, if I understood correctly the other switches in stack should not need to restart
01-10-2022 06:29 AM
That is correct. You should not need to restart the stack. That said, make sure you add the new switch during a maintenance window as you never know what can go wrong and it is better to be prepared.
HTH
01-10-2022 06:47 AM
you do not need to reboot the Live stack, you can add new switch to exioting stack.
You just configure new switch with switch number and priority ( make sure IOS Code is same as Live stack ) follow below guide :
01-10-2022 02:14 PM
@khalilsoltani47714 wrote:
I have two switch C9300-48T on stack, now i need add other Switch memeber 3
My question is when i add switch member 3 is need a restart for the two switch en production
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide