What is the NX-OS command for "Copy Run Flash" ? Is there a file that explains how NX-OS is different from ios? Thanks.
What is the NX-OS command for "Copy Run Flash" ? Is there a file that explains how NX-OS is different from ios? Thanks.
New to networking, testing at home lab trying to setup 2 VLANs on Layer 3 enabled SB500, VLAN setup seems fine but I cannot ping the gateway/firewall from the switch and cannot got in the internet from either of the 2 VLAN I created. Can someone poin...
Good Day everyone, I am fairly good at configuring Cisco but this I cannot get working. I have a working port channel on a 3750x 3 switch stack running version 15.0(2)SE2 with a 4 port port-channel, simple trunk configuration and LACP. It is connecte...
Hello , i have 2960X switch , i am configuraing it for cisc ise integration , but as i entered aaa new-model command only i can access the switch . i am entering aaa new-model and then from duplicate session try access the switch but it not working...
Hi All, We intermittently receives alerts like SNMP agent is not responding.Can anybody pls share troubleshooting/validation steps that can be done from network side (commands on Cisco Switch and Router) not from snmp server side.
I have cisco 6500 WS-SUP720-3BXL that I’m testing control-plane policing and it seems to be working, I see packet drops, but the CPU is still overwhelmed to 90%. I’m using an online stresser, basically a DDOS attack test. When I test with an LDAP amp...
Hello Experts - The question may sound naive, but I want to hear from you experts. I have a Physical windows server configured in NIC Teaming bundling two 10G Ethernet Port. The cables are connected to Nexus Switches A and B configured in VPC If I r...
Question regarding uplinks in a stack of access switches: If we have let's say 4 access switches that are data stacked, can we just have uplinks be on the one switch and that will connect up the core/distribution layer? (Trying to save cost on netwo...
Hi, I'm having trouble trying to get my switch to talk to an external network (192.168.1.0). Both my router and switch are on the 192.168.10.0 network. The 2800 series router is able to talk to the 192.168.1.0 network and access the internet through ...
Hi,SwitchingMy DC Core Switches comprise of 2 x Nexus 7009 switches running with VPC configured between them. They run in Primary Secondary mode.I have a SPAN destination port setup on Primary Core switch which is connected to an appliance that colle...
Hi all,with DNA essential license on C9300-24P is it possible to enable multicast routing and use PIM-dense mode ?Thank you
Does the device on the SPAN Port on a switch need to be configured to have the same IP addressing scheme as the devices attached on the source ports? For example, I have a computer running Wireshark on the SPAN port with a IP of 192.168.2.1 which wil...
Dear colleagues,Do you know where i can find list of features and all protocols what supports cisco's equipment ?
I have problem with the command auto completion in packet tracer's CLI. I was trying that with the 'Tab' key, but it's not working. Is there any other method for command auto completion?SwitchingFAQF,A,Q
As title states I recently attempted to upload the firmware and boot loader on my SG500-28P switch. It doesn't work at all anymore. It just boot-loops endlessly. The reset button is ineffective at anytime during the boot and doesn't ever reset the de...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-17-2024 12:44 AM | ||
09-12-2024 02:06 AM | ||
08-28-2024 02:25 AM | ||
08-20-2024 09:12 AM |
User | Count |
---|---|
10 | |
9 | |
7 | |
5 | |
5 |