04-13-2012 11:15 AM - edited 03-07-2019 06:07 AM
We are installing Cisco 2911 SEC/K9 for first time. We plug in and the SYS led is amber.
04-13-2012 11:20 AM
You will have to plug into the console port and look at the logs and see what is going on and if it actually booted all the way up .
04-13-2012 11:33 AM
Thank-you Glen. We have tried to plug in via RJ45 and USB 2.0. The router is never detected. The hyper terminal display remains blank.
08-25-2016 11:41 PM
Were you able to resolve this issue? I am having the same issue on my 2921 and it keeps rebooting after about 15 minutes. I've tried to replace the power supply and fans but that didn't work
04-13-2012 12:09 PM
I hope this helps.... you might also want to check this link......
SYS
Green System is active
Blinking Green System is booting up
Amber System failed
Blinking Amber Rommon failed
Best Regards....
Willy
06-25-2016 02:12 AM
We have the same broblem with Router Cisco 2921. the SYS led is amber, We have tried to plug in via RJ45 and USB 2.0. The router is never detected. The hyper terminal display remains blank and the router reload every 20 minutes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide