12-08-2021 12:37 AM - last edited on 03-09-2022 11:14 PM by smallbusiness
I have faced a problem with Catalyst 3750 recently, after we installed POE IP CCTV by about 2 months the switch suddenly crashed except only 3 ports which have the NVR and 2 cameras connected to. After the replacement of the switch with Catalyst 9200L all cameras worked except for two that broke down and require replacement.
I had a similar issue like that before but with Catalyst 9200 when it happened all CCTVs connected to that switch were down when we restarted it all cameras were up except for 9 ports that didn't operate so it required the replacement of the switch. After replacement we had also 2 cameras that completely broke down and required replacement.
Can anyone help on these?
Solved! Go to Solution.
12-08-2021 02:29 AM
Instead of raising RMA, open a ticket with Cisco TAC and rule out your actual issue.
Since OP is related to a Cisco switch, I am moving this discussion to Network Community.
12-08-2021 02:29 AM
Instead of raising RMA, open a ticket with Cisco TAC and rule out your actual issue.
Since OP is related to a Cisco switch, I am moving this discussion to Network Community.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide