cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
923
Views
5
Helpful
11
Replies

Type 2 Consistency Failed

himanshudwivedi
Level 1
Level 1

I am facing Type 2 Consistency Failed with No Type 2 Consistency reason... What are the possible reasons for this failure...?

 

Both the side VPC configuration are identical other than role priority. ?

4 Accepted Solutions

Accepted Solutions

marce1000
VIP
VIP

 

       - Post exact message as seen when port(s) are configured (and include the configuration-attempt-command too)  or from the logs.

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

View solution in original post

balaji.bandi
Hall of Fame
Hall of Fame

Let us know what device and Code running these device and post output :

 

show vpc consistency-parameters vpc <vpc-num>

sh vpc consistency-parameters global

 

You need to troubleshoot :

 

https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/101x/troubleshooting/cisco-nexus-9000-nx-os-troubleshooting-guide-101x/m-troubleshooting-vpcs.pdf

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post

Both of them using VPC Ver 2.. you can check in attachment..

View solution in original post

Hello

It doesnt seem so.

NC Core-P version 2
NC-Core-S version 1


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

View solution in original post

11 Replies 11

marce1000
VIP
VIP

 

       - Post exact message as seen when port(s) are configured (and include the configuration-attempt-command too)  or from the logs.

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Can you please check the attachment.

balaji.bandi
Hall of Fame
Hall of Fame

Let us know what device and Code running these device and post output :

 

show vpc consistency-parameters vpc <vpc-num>

sh vpc consistency-parameters global

 

You need to troubleshoot :

 

https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/101x/troubleshooting/cisco-nexus-9000-nx-os-troubleshooting-guide-101x/m-troubleshooting-vpcs.pdf

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Please check the attachment...

As per the output does not seems to be an issue major, but good to fix that issue. we need to compare the config also part of this issue.

 

as per your output below command - errdisable recovery cause vpc-peerlink (only see on CORE-S not on CORE-P)

 

Like this there may be small config issue i would take in to notepad ++ and compare and start fix 1 config at a time and check.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello
Check your vtp versions!


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Both of them using VPC Ver 2.. you can check in attachment..

Hello

It doesnt seem so.

NC Core-P version 2
NC-Core-S version 1


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Apologize for the same,, it was old attachment.... Please check the same in attachment..

Hello
Can you post the run config of both switchs please?


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

VTP Version are also same for both the nexus

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: