07-29-2021 08:56 PM
I am facing Type 2 Consistency Failed with No Type 2 Consistency reason... What are the possible reasons for this failure...?
Both the side VPC configuration are identical other than role priority. ?
Solved! Go to Solution.
07-29-2021 11:55 PM
- Post exact message as seen when port(s) are configured (and include the configuration-attempt-command too) or from the logs.
M.
07-30-2021 02:54 AM
Let us know what device and Code running these device and post output :
show vpc consistency-parameters vpc <vpc-num>
sh vpc consistency-parameters global
You need to troubleshoot :
07-30-2021 03:19 AM - edited 07-30-2021 03:27 AM
Both of them using VPC Ver 2.. you can check in attachment..
07-30-2021 03:30 AM
Hello
It doesnt seem so.
NC Core-P version 2
NC-Core-S version 1
07-29-2021 11:55 PM
- Post exact message as seen when port(s) are configured (and include the configuration-attempt-command too) or from the logs.
M.
07-30-2021 02:33 AM - edited 07-30-2021 03:24 AM
07-30-2021 02:54 AM
Let us know what device and Code running these device and post output :
show vpc consistency-parameters vpc <vpc-num>
sh vpc consistency-parameters global
You need to troubleshoot :
07-30-2021 03:26 AM
07-30-2021 04:28 AM
As per the output does not seems to be an issue major, but good to fix that issue. we need to compare the config also part of this issue.
as per your output below command - errdisable recovery cause vpc-peerlink (only see on CORE-S not on CORE-P)
Like this there may be small config issue i would take in to notepad ++ and compare and start fix 1 config at a time and check.
07-30-2021 03:10 AM
Hello
Check your vtp versions!
07-30-2021 03:19 AM - edited 07-30-2021 03:27 AM
07-30-2021 03:30 AM
Hello
It doesnt seem so.
NC Core-P version 2
NC-Core-S version 1
07-30-2021 03:36 AM
07-30-2021 03:42 AM
Hello
Can you post the run config of both switchs please?
07-30-2021 03:50 AM
VTP Version are also same for both the nexus
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide