Unable to create object group SUP-8E

[HCL Support]

Hi Team,

One Customer having pair of 4507R+E Switches & we facing issue while creating object-group.

As discussed with the concern the IOS up gradation Activity done recent on Saturday but the same CLI was also not tested with previous IOS image. The license level seems ok, need the suggestion on the issue we facing.

Attaching here the respective logs.

ROM: 15.1(1r)SG5
CORE-CT1-A uptime is 52 minutes
Uptime for this control processor is 54 minutes
System returned to ROM by power-on
System image file is "bootflash:cat4500es8-universalk9.SPA.03.07.00.E.152-3.E.bin"
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1B9E

License Information for 'WS-X45-SUP8-E'
    License Level: entservices   Type: Permanent
    Next reboot license Level: entservices

CORE-CT1-A(config)#objec?

% Unrecognized command

CORE-CT1-A(config)#object-gro

CORE-CT1-A(config)#object-gro

                    ^

% Invalid input detected at '^' marker.

CORE-CT1-A(config)#

Regards,

Ashutosh

[trond1endr]

We recently installed a Cat 4503E and a Sup8-E. We're running IOS-XE 3.7.2E with IPBase license.

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch  Software (cat4500es8-UNIVERSALK9-M), Version 03.07.02.E RELEASE SOFTWARE (fc1)

The object-group command is available in our case:

Switch(config)#obj   <-- Tab pressed at this point

Switch(config)#object-group