07-17-2012 09:59 AM - edited 03-07-2019 07:49 AM
Hi All,
I am trying to create an anotherb Vlan 97 on cisco WS-C3548-XL but unable to made up the vlan interface .
S35_PKS_A32#sh vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active
5 Admin active
27 VLAN0027 active
32 VLAN0032 active Fa0/13, Fa0/25
33 VLAN0033 active Fa0/8, Fa0/14, Fa0/27, Fa0/37,
Fa0/38, Fa0/42
36 VLAN0036 active
37 VLAN0037 active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
Fa0/7, Fa0/9, Fa0/10, Fa0/12,
Fa0/16, Fa0/18, Fa0/19, Fa0/20,
Fa0/21, Fa0/22, Fa0/26, Fa0/29,
Fa0/30, Fa0/31, Fa0/33, Fa0/34,
Fa0/36, Fa0/43, Fa0/44, Fa0/45,
Fa0/46, Fa0/47, Fa0/48
39 VLAN0039 active Fa0/5, Fa0/15, Fa0/23, Fa0/24,
Fa0/32, Fa0/39, Fa0/40
40 VLAN0040 active Fa0/11, Fa0/28
41 VLAN0041 active
44 VLAN0044 active
47 VLAN0047 active
48 VLAN0048 active
50 VLAN0050 active
54 VLAN0054 active Fa0/41
57 VLAN0057 active
60 VLAN0060 active
65 VLAN0065 active
66 VLAN0066 active
96 VLAN0096 active
97 VLAN0097 active
104 VLAN0104 active Fa0/17
130 VLAN0130 active Fa0/6, Fa0/35
323 VLAN0323 active
500 VLAN0500 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
27 enet 100027 1500 - - - - - 0 0
32 enet 100032 1500 - - - - - 0 0
33 enet 100033 1500 - - - - - 0 0
36 enet 100036 1500 - - - - - 0 0
37 enet 100037 1500 - - - - - 0 0
39 enet 100039 1500 - - - - - 0 0
40 enet 100040 1500 - - - - - 0 0
41 enet 100041 1500 - - - - - 0 0
44 enet 100044 1500 - - - - - 0 0
47 enet 100047 1500 - - - - - 0 0
48 enet 100048 1500 - - - - - 0 0
50 enet 100050 1500 - - - - - 0 0
54 enet 100054 1500 - - - - - 0 0
57 enet 100057 1500 - - - - - 0 0
60 enet 100060 1500 - - - - - 0 0
65 enet 100065 1500 - - - - - 0 0
66 enet 100066 1500 - - - - - 0 0
96 enet 100096 1500 - - - - - 0 0
97 enet 100097 1500 - - - - - 0 0
104 enet 100104 1500 - - - - - 0 0
130 enet 100130 1500 - - - - - 0 0
323 enet 100323 1500 - - - - - 0 0
500 enet 100500 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
S35_PKS_A32#
S35_PKS_A32#sh run int vlaN 97
Building configuration...
Current configuration:
!
interface VLAN97
ip address 172.23.21.8 255.255.255.0
no ip directed-broadcast
no ip route-cache
shutdown
end
S35_PKS_A32#sh int vlaN 97
VLAN97 is administratively down, line protocol is down
Hardware is CPU Interface, address is 0008.a31c.f180 (bia 0008.a31c.f180)
Internet address is 172.23.21.8/24
MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA
ARP type: ARPA, ARP Timeout 04:00:00
S35_PKS_A32#
Pls. help me to made it up the vlan port
Version:
Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)WC3b, RELEASE SOFTWA
RE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 15-Feb-02 10:51 by antonino
Image text-base: 0x00003000, data-base: 0x00337600
ROM: Bootstrap program is C3500XL boot loader
S35_PKS_A32 uptime is 18 minutes
System returned to ROM by reload
System image file is "flash:c3500XL-c3h2s-mz.120-5.WC3b.bin"
cisco WS-C3548-XL (PowerPC403) processor (revision 0x01) with 16384K/1024K bytes
of memory.
Processor board ID FOC0602S04L, with hardware revision 0x00
Last reset from warm-reset
Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
48 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:08:A3:1C:F1:80
Motherboard assembly number: 73-3903-11
Power supply part number: 34-0971-02
Motherboard serial number: FOC06010056
Power supply serial number: APQ05430BJB
Model revision number: N0
Motherboard revision number: B0
Model number: WS-C3548-XL-EN
System serial number: FOC0602S04L
Configuration register is 0xF
S35_PKS_A32#
S35_PKS_A32#
Solved! Go to Solution.
07-17-2012 04:36 PM
Hey Leo,
Many a good tune out of an old fiddle.
Sanjeev
Here the config guide
http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc3/swg/sc.html
These old switches are NOT routers
They only support ONE interface Vlan which is use for management, remote telnet etc.
Regards,
Alex.
Please rate useful posts.
07-17-2012 03:00 PM
What error message did you get when you tried "no shut" under int vlan 97
Siddhartha
07-17-2012 03:26 PM
Wow. Your switch is 10 years old and running an equally 10-year-old IOS.
07-17-2012 04:36 PM
Hey Leo,
Many a good tune out of an old fiddle.
Sanjeev
Here the config guide
http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc3/swg/sc.html
These old switches are NOT routers
They only support ONE interface Vlan which is use for management, remote telnet etc.
Regards,
Alex.
Please rate useful posts.
07-17-2012 06:55 PM
You are getting a layer 2 vlan and a layer 3 svi mixed up . As previous poster said this is a layer 2 switch only so the only reason to have an SVI defined is to manage the switch. I'm assuming it already has a l3 SVI to manage it so I would leave that alone and delete the layer 3 svi for vlan 97. Seeing that there are so many vlans on the switch that means you have a trunked link somewhere to the L3 device which does the routing . You already have a L2 vlan defined for vlan 97 as shown in the show vlan command so you should be set to go . If you need routing for this subnet it is done on another device that is attached via a trunk .
07-18-2012 12:30 AM
Thanks All for the clear Information. Need some replacement.
Reg
Sanjeev
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide