cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2655
Views
5
Helpful
4
Replies

vPC Peer Link on QSFP Ports

Hi All,

Can I use the QSFP ports on N9Ks for their vPC Peer Link?

2 Accepted Solutions

Accepted Solutions

willwetherman
Spotlight
Spotlight

Hi,

Yes you can use the 40Gbps QSFP+ ports to form the vPC peer link on the Cisco Nexus 9K.

"You can create a vPC peer link by configuring a port channel on one Cisco Nexus 9000 Series chassis by using two or more 10-Gigabit Ethernet ports or 40-Gigabit Ethernet ports"

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html

View solution in original post

Ganesh Hariharan
VIP Alumni
VIP Alumni
Hi All,
Can I use the QSFP ports on N9Ks for their vPC Peer Link?

Hi Carlos,

You configure a Virtual Port-Channel interface using individual interfaces, just like any other port-channel.  So, yes, you can use the 40G interfaces to create a VPC port channel.  You can also use it for anything else you want, like the peer-link or keep-alive. 

There are no restrictions on usage and you can leverage based on your requirement.

Hope it Helps..

-GI

View solution in original post

4 Replies 4

willwetherman
Spotlight
Spotlight

Hi,

Yes you can use the 40Gbps QSFP+ ports to form the vPC peer link on the Cisco Nexus 9K.

"You can create a vPC peer link by configuring a port channel on one Cisco Nexus 9000 Series chassis by using two or more 10-Gigabit Ethernet ports or 40-Gigabit Ethernet ports"

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html

Thanks!

Ganesh Hariharan
VIP Alumni
VIP Alumni
Hi All,
Can I use the QSFP ports on N9Ks for their vPC Peer Link?

Hi Carlos,

You configure a Virtual Port-Channel interface using individual interfaces, just like any other port-channel.  So, yes, you can use the 40G interfaces to create a VPC port channel.  You can also use it for anything else you want, like the peer-link or keep-alive. 

There are no restrictions on usage and you can leverage based on your requirement.

Hope it Helps..

-GI

Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: