11-28-2016 08:55 AM - edited 03-08-2019 08:20 AM
Hi
Just powered up the 4503-E chasing with Sup7-E and a WS-4712-SFP-E. Going through the configuration shows the card is not supported.
Checked the website, it definitely is. Do not know how to go about it.
HELP!!!!
11-28-2016 09:20 AM
Hi,
What is the version of IOS you are running?
According to the data sheet, the minimum IOS version to support this module is
3.1.0SG.
Link:
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/10GE_Tx_Matrix.html
HTH
11-30-2016 09:41 PM
Dear Reza
Thanks for the reply.
We don't have a problem with the tranceivers. it's the 4712-SFP-E itself which is showing unsupported blade module.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide