Video Conferencing Design Guide

[patrick.lopez]

Does any one know if there is a VC design guide.

If so could you please point me to the link.

Thank you

PL

[zhaoning]

could you please send me a copy too

wang_bin@neusoft.com

[lmace711]

I forgot my email address, sorry!

Video Guide setup

Thanks!

lucky.mace@drmci.org

[j.missavage]

Where can I also get the VC design guide?

Thanks in advance.

John

Systems Engineer

Houston Chronicle

john.missavage@houstonchronicle.com

[toyinsekoni]

Do i want to be left out. No, can i have a copy please. Thank you.

toyin_sekoni@yahoo.com

Thnk you Thank you Thank you.

Daniel.

[mrodriguezm]

could I get plese a copy of the link also

Thanks

Manuel

manuel.rodriguez@entercs.com.mx

[Jayd000007]

I need this Document too

kamal010203@yahoo.de

Many Thanks.

[ahmadabuzayyad]

I need this also if you can

ahmadabuzayyad@yahoo.com

thanks

[manishmittal]

Could i please get a copy too ???

[dkamande]

Please send me a copy of the guide as well.

debe057@hotmail.com

TIA

[AJAZ NAWAZ]

and me too :-)

ajaz.nawaz@gmail.com

thanks in advance

Ajaz

[vraut]

Hi,

Try this link.

http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns818/landing_video_conf.html

Hope it helps.

Thanks

[gdennis1955]

This guide is using Gatekeeper for call control. We will be using CUCM v8 for call control, does that make a big difference?

[abdey]

Please check the Multipoint Conferencing DIG in the following link :

http://wwwin.cisco.com/telepresence/design.shtml

[Danilo98]

Should be the same process