10-17-2001 12:24 PM - edited 03-17-2019 07:51 PM
Does any one know if there is a VC design guide.
If so could you please point me to the link.
Thank you
PL
10-17-2004 10:49 PM
could you please send me a copy too
10-29-2004 09:03 AM
10-27-2005 08:13 PM
Where can I also get the VC design guide?
Thanks in advance.
John
Systems Engineer
Houston Chronicle
02-10-2006 05:03 AM
Do i want to be left out. No, can i have a copy please. Thank you.
Thnk you Thank you Thank you.
Daniel.
03-01-2006 04:12 PM
05-02-2006 06:28 AM
05-10-2006 03:43 AM
05-12-2006 07:46 AM
Could i please get a copy too ???
05-16-2006 10:34 AM
06-02-2010 04:52 AM
08-17-2010 11:31 AM
Hi,
Try this link.
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns818/landing_video_conf.html
Hope it helps.
Thanks
07-30-2012 07:47 AM
This guide is using Gatekeeper for call control. We will be using CUCM v8 for call control, does that make a big difference?
08-14-2012 02:01 AM
Please check the Multipoint Conferencing DIG in the following link :
02-08-2024 12:14 PM
Should be the same process
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide