â05-25-2013 08:28 AM - edited â03-19-2019 06:46 AM
I am trying to install Unity connection 8.6 in my lab environment but i dont' see the Unity connection as an install option. I tried to install many times but everytime the install option defaults to CUCM only. Any idea why so. I am using a low end Dell PE T110II with a few VMs.
Thank you for the help.
â05-25-2013 07:00 PM
Hi,
If you don't see unity connection as an install option that means that the media isn't detecting adequate hardware. Are you using an ova template?
I would recommend looking up the hardware guide and make sure you have adequate gear to run it.
Good luck.
Sent from Cisco Technical Support iPad App
â05-26-2013 09:37 AM
Hi,
Some media doesn't come with CUC, that will depend in the version you're installing.
Regards
Please remember to rate useful posts clicking on the stars below.
Favor calificar todos las respuestas Ăștiles dando click en las estrellas de mas abajo.
___________________________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
â05-26-2013 08:41 PM
Make sure that your hard drive has at least 200 gb of free space on it.
You 'should' then see the option for unity.
Sent from Cisco Technical Support iPhone App
â05-26-2013 09:35 PM
Thank you everyone who responded. As you all indicated, I was low on hardware resources. After I tried with 4 GB of RAM and 160+ GB harddrive, I got Unity Connection as an install option. Thank you all.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide