- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-20-2019 12:59 AM
Hello Guys,
Can we configure Inter-Cluster-Trunk or SIP Trunk between CUCM 7.1 and CUCM 12.X for Inter-Cluster Calling.
Is it supported ?
Solved! Go to Solution.
- Labels:
-
UC Migration
-
Unified Communications
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-20-2019 07:33 AM
SIP trunks are only recommended when CUCM releases are 8.6+, anything below should use an ICT
It should work just fine, it was obviously never tested as 7.x is long EOS/EOL.
java
if this helps, please rate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-20-2019 07:33 AM
SIP trunks are only recommended when CUCM releases are 8.6+, anything below should use an ICT
It should work just fine, it was obviously never tested as 7.x is long EOS/EOL.
java
if this helps, please rate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-20-2019 11:04 PM
Thanks Jaime,
We configured ICT between CUCM 7.X and CUCM 12.X. Its working fine.
