Hi All , I want to update Cisco Nexus from n3500-uk9.6.0.2.A4.4.bin to n3500-uk9.6.0.2.A6.5a.bin , but am facing threshold error. Please guide me what are the possibilit for it. I have free space but facing error. # dir bootflash:/// ...
Forum Posts
Running SCOM 2012 R2 with the 4.1 UCS management pack, discovered and monitoring the central UCS fine, we have 28 remote IMC's we are trying to monitor, when added in pairs either one of both fail with login error and SCOM stops monitoring them, i ha...
we are planning for a firmware upgrade on our UCS environment. Currently its running on 2.2(3c) and planning to upgrade it to 2.2(8). SO my question is can we apply the upgrade on a particular chassis or a blade server that we want to run on 2.2(8).T...
Resolved! HX API through PowerShell
I am trying to create a framework for Powershell access to the HX API. I cannot seem to get past authentication. PowerShell is preferred, because follow-on actions are going to be in PowerCLI. Basically looking to obtain a list of nodes. Put each no...
I want to get the CIMC & BIOS settings and compare it across a large number of servers. I can get the BIOS data with ucscfg which is fine. However getting CIMC data seems impossible. Realistically I am looking for Networking and Storage primarily. W...
Hey all, I'm deploying a new HX cluster and hitting this error on all of my nodes. (IPs change per node respectively) ESXi reachability check IP address: 172.20.7.22 at default port: 902 is not reachable. This is all internal and not going out ...
Resolved! renaming objects in UCS manager
How do I rename objects in UCSM - things like service profiles,templates, policies, etc. I can't find anything in the GUI or CLI to do this.Thanks.
Hello, is any of you who may suggest a list of HW HDD supported by ACS-1121? from, data sheet it says HDD 250 GB 7.2K RPM 3.5 inch. Any HDD brand is good, or there is a list of matrix compatibility? thanks https://www.cisco.com/c/en/us/products/c...
Hi I upgraded the firmware of UCS(C240 M3) from 1.5.3 to 2.0.4c using HUU. Most of the server was finished completely but one server was failed. So I booted the HUU again but the 2 NIC card are missed in the list. Therefore the firmware of the NIC ...
we are planning for a firmware upgrade on our UCS environment. Currently its running on 2.2(3c) and planning to upgrade it to 2.2(8). SO my question is can we apply the upgrade on a particular chassis or a blade server that we want to run on 2.2(8).T...
Hi, we have a new Server - Cisco UCS C480 M5. We have configured the x2 Physical Disks into x1 Virtual Disk and this is showing up fine in the CIMC GUI, this was done via the Advanced Menu in the BIOS. In the CIMC, the Virtual Drive has been set as...
Hello Experts,I have to upgrade 10 IO modules (as 5 chassis are there & UCSM version is 2.2). i.e 2104 to 2204.Already refered cisco link :-https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/chassis-install-guide/ucs5108_install/ucs5108_i...
Trying to attaching USB external backup Drive to a CISCO 4351 UCS-E180D-M3/K9 UCS-E,DoubleWide,8Core, 1.8 GHzCPU,4 HDD and nit being recognized, new to blade servers, any suggestions, Admins have added the device to VMware - Not recognized
Hello all. I am trying to use the UCS XML API to retrieve the health status of a blade. The XML request I'm using is: <configResolveChildren inDn="sys/chassis-1/blade-1" inHierarchical="false" cookie="1531708258/f8db41e4-c408-4126-bb27-5b75...
There wasn't even a 3.2(3c) release, as far as I can tell. Everything is working as expected, but the mismatched version is making us scratch our heads. Has anyone else encountered this? UCS-FI-6248UP - B200 M4 (blades show 3.2(3d)) See "Runnin...
