Unified Computing System Discussions

Hi:New to UCSM 1.4(xx). When I create a new VLAN for customer, I saw the following, please help to explain:Sharing Type: None - Default, I presume. Should we use it most of the time?Primary: When do we use this?Isolated - is this for Private VLAN? Wh...

I have a UCS-C210M2 running verison 1.3(1c).   When I boot up the server it says checking memory and then beeps a couple times for the USB Keyboard/Mouse then shows the Cisco Logo.  This stays like this for about 30mins and then reboots and does the ...

I want to install 10 dimms (each 8GB) to a B250 M2.The current configuration is:CPU 1: channel A 4 dimms- each 4GBchannel B  4 dimms- each 4GBchannel C  4 dimms- each 4GB CPU 2: channel D  4 dimms- each 4GBchannel E   4 dimms- each 4GB channel F  2 d...

Hello,When i install a new license a port within grace period, do i need to reset the swicth or  re-enable the port?Thank you.

We are setting up a test pair of of 6120's and are trying to get the uplinks going.  We are only doing a single uplink from each fabric interconnect.So fabric interconnect 1 goes to 5k-1 and fabric interconnect 2 goes to 5k-2.Since we are only doing ...

Hi there,I installed and configured CUCM 8.5 on Cisco UCS C210 M2. Now we got some issues with our Cisco UCS C210 M2 and I want to move my CUCM 8.5 to the new Cisco UCS C210 M2. I tried to "download" the CUCM 8.5 folder to "local machine" but it's li...

Hi there,Is it possible to configure NIC-failover or NIC-teaming on Cisco UCS C210 M2? The server got 6 NICs and it would be fine if I can configure NIC-failover/NIC-teaming or ether-chanel.Thanks.

Dear NetPro gurus,One of my customers is looking for a small-sized deployment of Cisco UCS on their environment.  But there are so many different versions like UCS Manager, UCS Express, UCS 6100, UCS 5100, UCS 2100 etc..  Which one should my customer...

Hi All,can someone from cisco tell me how to get cisco vmware vsphere ESXi 4.1 update 1 that was certified by Cisco ?because the last release from the vmware website still 4.1 without update 1.http://downloads.vmware.com/d/details/esxi41_cisco_oem_is...

Hello,We are in the midst of implementing a VM server cluster with SAN Storage. We've recently been quoted some good prices on UCS C200 M2's with dual proc's and 96 gigs of ram (quantity 3).Are there many people out there using these servers for thin...

Hi All,I have a case which S6100 have some 10G ports error, now I want to run the traffic test with the IXIA.I boot the system with N5K image and create 20 vlans(2 ports in a vlan), but I cannot diable the spanning-tree for the test.So if anyone have...