01-12-2018 01:58 AM - edited 03-01-2019 01:24 PM
Trying to install Windows Server 2016 on a C240 M4. The server has 2 Intel SSDs connected to motherboard SATA ports, so disk controller is the Intel C610 Series Chipset/Intel X99 Chipset Platform Controller Hub (PCH). I have managed to configure them as a RAID1 by configuring PCH SATA Mode as 'LSI SW RAID', but cannot get Windows Server 2016 to see this virtual disk.
Server firmware has been updated using HUU 3.0(3f). SCU v5.0(3a) sees the disk controller under Server Inventory, but OS Installation does not present virtual disk as an option. Booting direct from Windows Server 2016 installation disk also does not present disk, and attempting to load drivers from Cisco drivers ISO also does not resolve. Can anyone please help?
Thanks.
01-12-2018 04:40 AM
What does your boot order look like?
Are you using Legacy or UEFI ?
01-15-2018 12:13 PM - edited 01-15-2018 12:13 PM
Have you checked to make sure you have a valid configuration?
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/raid.html
01-16-2018 01:09 AM
Thanks for the replies. I found this document later on Friday which helped me resolve my problem. Specifically it refers to the location of the correct driver for the Embedded RAID (<OS>/Storage/Intel/C600/) - https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C240M4/install/C240M4/raid.html#37150 and I was able to install directly from the Windows Server 2016 install image after loading this driver (the server is in Legacy boot mode).
A bit frustrating that SCU 5.0(3a) OS Installation doesn't seem to load this driver as the same virtual drive was not available (even though SCU shows it under Server Inventory).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide