mahmoud.abdelkhalek

i have 3 sitessite A and Site B and site C when intiate call conference between 3 sites and the init...

i have aproblem with my Pub and Subtwo server appear below message and can't login to PLM

R6#sh ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGPD - EIGRP, EX - EIGRP ex...

not workingR6#ping 1.1.1.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 1.1.1.1, t...

please helpi need to go to vrf internet from global routing table in R6 need to ping 1.1.1.1 from R6...

how can i block udp traffic flooding from below tool just have cisco router 2900 series and core swi...

how can check if firewall prevent RTP

as per the above 2 Pics , phone 1 and phone 2 registered to HQ-CUCMwhen Link 1 down, phone 2 registe...

C2900-UNIVERSALK9-M), Version 15.3(3)M2

FXO ports with calls coming in from the prima cell and configured for service MGCP are not providing...

all telnet configuration was exist and after 6 month VSS configuration telnet configuration deleted

i have 2 switches 4500x with VSS and i can access with telnet and consolebut once i cant access teln...

!interface GigabitEthernet1/0/1 switchport access vlan 3 switchport mode access switchport voice vla...

this command is configured , i think the problem in QOS

ip phone 3905 switch 2960x