Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello out there,I am not new based on what you see from this account. I have experience managing Cisco Call Manager starting with version 5 and Avaya as well. Just happen to be on this account it shows new user, not new. Anyway here is my question an...
Hello, It is observed that for multiple Iphone 15 with IOS 17.1 and IOS 17.2 that for any call made from the Iphone 15 to any directory number that is housed within a Cisco CUCM PBX v 14 that there is no ringback tone observed as audible on the Iphon...
Hello,8861 IP Phone firmware version is sip88xx.14-2-1-0001-14For an 8861 IP phone that is setup in Enhanced line mode, tests show that it is possible to display the Calling party number for connected status. external call rings to the IP Phonefrom t...
Hello,According to cisco documentation for firmware release 14.1 for Cisco IP Phones there is an an improved call connected status and line label display for Enhanced line mode. The Line text label display in ELM parameter within product specific con...
Hello how are you? For setup in Cisco Unified Communications Manager/Cisco Call Manager Call routing > Route Hunt > Route patternWhat is the value add of setting up area code specific route patterns?My understanding and utilization of route patterns ...
If in CUCM Cisco Unified CM Administration I click Device > Phone > and then a phone > and then go to Product Specific Configuration layout area > the last item in the list is " Dedicate One Line for Call Park." Additionally, there is no mention of "...
Thank you for the response but can you please tell me where that setting is located? I was told it was in the Product Specific Configuration layout of the Device > Phone section of CUCM but it is definitely not there in this version, so was curious w...
Also if there is no way to show both the name and number in enhanced line mode for connected calls, because right now only the name is displaying on connected calls along with the directory number of the phone that received the call, would the solut...
