Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a customer in Mexico that is requesting some custom integrations with their Webex Calling. However, I found this on one of Broadsoft’s documents: Currently, Webex Calling Xsi integrations are only supported in the US. I wanted to know i...
Hello, I successfully registered my UCCX Finesse server to Context Service and it's working fine. When customers call or chat, pods are being created in the cloud and the customer journey is accessible from the Finesse gadget. Then I needed a way to ...
I have received three LWAPP APs. The APs are native LWAPP, they were not converted from autonomous to LWAPP.However, I need to convert them to autonomous mode. Is it possible?
I noticed something in practice that wanted to confirm with what theory says.I have something like this:dial-peer 1 voice voip destination-pattern 1.. session target ipv4:10.0.0.1 session protocol sipv2ip route 10.0.0.0 255.0.0.0 20.0.0.10ip route...
Hi Chirag,
The files to which Call Studio saves the project and the files that are finally deployed to CVP are different. So, the short answer is no, you cannot open the deployed files in Call Studio to see the call flow. Having said that, the files ...
Hi Russel,Just for the fun of it, would you matter recording the quacking sound and posting the .mp3 file? I'm so curious to hear that quack!I'm sorry for not having something more useful to say, but I have absolutely no idea of what this could be.Re...
Unfortunately, due to the very nature of the FXO port, which lacks for DNIS information, you can't do that. If you need incoming faxes to be sent to different e-mail accounts you'll need to have several FXO ports, one for each possible destination.It...
That's correct, you don't need ACS at all.Furthermore, if you don't have a switch capable of being a VPMS server, you can still deploy it with an open source vmps server, such as http://vmps.sourceforge.net. I have used it and it works fine.Regards,R...
Paolo,Yes, you are absolutely right. I misinterpreted what I saw. I'm using Netflow to monitor traffic in my routers. My AS5400 has two different interfaces, say Fas0/0 and Fas0/1. The default route points to Fas 0/0 while the dial-peer's session tar...
