Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi allNeed some help.I am new to scripting and I have been asked to create a script that will detect a devices MAC address on a switch and then shut that port down, if the device is moved to another port that port gets shut down again.the script woul...
Hi there.
I am looking for guidance on how to block calls to a specific number on CUCM 10.6
Basically I want to block anyone from calling a specific landline number.
How would I go about doing that?
Standard stuff, We dial 0 for an outside line a...
Hi all.
Question then background.
How do I call a PLAR number (CUCM 10.5)
Background.
We have virtual receptions in some of our offices and to aid the sending of calls to the right places, change the dialling number location and the swap out of...
Hi all
So me and my team look after about 180 offices all running Cisco 2951, 1 or more 3802I AP's in flex-connect mode and a WLC 5520.
the issue we have is that we have some router running IOS version c2951-universalk9-mz.SPA.153-2.T.bin
When we t...
Hi there.
Is there a way of force opening and closing a CSQ by dialling a specific extension number?
Would like to set up an "Emergency Number" for our call centre so when they have to evacuate the Tl can just dial a number and it auto closes a speci...
Thanks for that.I already use port security for a lobby phone, to stop people unplugging and plugging in a different device but i really need to work out how to stop a specific device, or at least search for the OUI of the device type and then kill t...
Hi there.
Has the IPCC Extension been configured under the Directory Number Associations on Call Manager?
This can be found under the User Management -> End User.
Hi there.I did nearly the same setup 1 year ago with a new building and 4 floors. I did 2 x 6500 in vss, 4509's on 2 floors and 3700's on the remaining floors. L3 ether channels to the core then BPG to our MPLS provider.Sent from Cisco Technical Supp...
Hi there.Check the baud speed in your console software.I had the same issue and the speed was set to 11500 where it should have been the default 9000 or so.Sent from Cisco Technical Support iPhone App
Hi there.I would look at either CCNA Security or CCNA Voice.But the biggest piece of advice I can give is make sure you know the CCNA backwards and inside out.Buy a couple of routers and switches for home and practice practice practice, if you can't ...
