Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am running Jabber for Windows 11.1 and UCM 10.5/Unity Connections 10.5. When I click on the 'Call Voicemail' button under the Messages tab, it takes the user to the base Unity Connections IVR and not the user's voicemail box. It works fine when in ...
I am new to Ironport and new to this site. I understand that the L4TM can use a SPAN port on a L2 switch but I was wondering if you can span a vlan for the L4TM. Thanks in Advance.
Hi Eric. I tested Variphy several years ago and they have a good product. I did see Akkadian labs at Cisco Live back in June and their products look really good. I also had a session on Prime Collaboration Provision using the new 12.x version and it ...
Are you using TDM or SIP trunks? Our SIP provider will accept 10 digits and will bill LD based on origination/destination of the call. I send everything out as 10 digits, except International.
This was a very good thread. I have been having the same issues with setting up VPN on our ASA. I have a question regarding the IP Pools for VPN users. Should you assing the pool to a specific interface? Say for instance I have a DMZ interface that i...
We have a 7937 conference phone in a large boardroom. The boardroom has overhead speakers for paging. Is there anyway we can connect the speakers to the 7937 to be able to hear the audio from the 7937 over the speakers?
Allan, thanks for your post. I have discovered on all of the CME routers I have deployed do not have the network-clock-select command and on every single one I am getting tons of SLIP errors. I understand the need for this command but it makes me won...
