I have a UC560 that is running 8.6.1 and we have a PRI connected as the only phone line. Our PRI provider will not let us send a caller id phone number that is not in their system so when we have a SNR call it shows up as our main number on the cell...
I have a group of users that are in a hunt group and we need to disable the DND button on their phones. I am running UC560 with 8.2.0, CCA 3.11 config.Is this possible?
Hello.. I have a 4506 with a SUPIII card and a WS-X4448-GB card. I want to enable jumbo frames for a iscsi connection. When I go into the interface that I want to enable jumbo frames on I issue the command:mtu 9192. I then get the error "% Interface ...
David.. I have used TFTPD running on a laptop on a isolated network to flash 7941's to the 8.5.2r1 rev so they can go to 8.5.4 with the automatic upgrade on the uc560. Here is a link that explains it better as you are not converting but using this as...
Mike.. The default extention for a auto transfer to vm is 6. So if you tranferred to ext 190 it would be 6190 for a local transfer to vm . You can try to send a test call using the following 8 (for multisite) 1 (or whatever site code you are using) ...
I had the same issue at a client except I am using 7945's at that site. Never found a resolution. Removed all phones from night service and the phone lockup problem went away. I know this doesn't help but figured that you might want to know of some...
You can setup the 4 Meetme conference extensions but you will only be able to have a total of 32 people in conference at any one time.Example: One room has 20 people in it. .The second room can only have 12.
