Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there, we are using Cisco Jabber for windows and have a small niggling issue where we have a number of internal phones that are routed through translation patterns to MASK the callers cli. This works fine for phone to phone calling as there is no ...
Hi All, I am in the process of upgrading a standalone ISE deployment and have uploaded the upgrade package to a repository on the ISE server. Unfortunately the file was over 10GB and took an age to upload and as such I left it running over night. Now...
I have recently upgraded from a 887 router to the 1100 ISR, we have a third party client that uses this router to VPN into the local network and connect to some of the services on the LAN. They use PPTP and standard windows client however since being...
Hi, does anyone know how to disable LLDP on a 9115ax access point that is in CAPWAP mode and connected to a Cisco 9800 WLC
I am running version 17.9.4a of code with the latest APSP
I want to disable LLDP on the AP's as it is creating unknown protocol...
Is this available yet, I currently use Infrastructure Prime version 3.1 and old 5508 WLC's, we are now refreshing the infrastructure with Cisco 9800-40 WLC's and was going to upgrade Prime to Version 3.10(x) but that has gone EOS/EOL so looking at wh...
Was there a solution found for this, I have 2 2911 routers using the LMR function for aviation communication and I am looking to replace the ageing equipment. If Cisco have removed the LMR feature then is there another vendor device that can provide ...
I also have this problem, I am going from 14.0 to 14.3.7 did you get a resolve? Expressway C upgraded ok however E is giving me
Post install script /tandberg/etc/postinstall.current.d/52-set_pubkeyalgorithms failed
Hi there, I am wondering if you ever got to the bottom of this, I am seeing a similar issue between 2 phones on the same subnet. If I call any other phone there isn't an issue just calls between 2 particular phones I get one-way audio.
We are using version 17.9.4a it only appears to be happening with ports connected to Paxton devices. They do not generate any traffic from the device and only have traffic pushed to them when an update to the configuration is required. They are very ...
