Hello community, I've searched high and low to see if this is possible and can not find the answer. Posting to get verification it is not possible. We have a handful of CUCM, Unity, IM&P servers running 11.5x currently. Right now to SSH to CLI we ...
Hello all!
I have a challenge I've been working on, searching for documents, reading documents, open TAC case, etc.
Challenge is I'm trying to put a modem on a VG320 FXS port and call outbound through the SIP gateway to save on toll charges. I...
Good afternoon,
Not sure this is the best category for this but worth a shot.
Trying to import a user from LDAP to Cisco Unity 11.x and getting a failure:
Friday, October 19, 2018 11:58:53 AM EDT ERROR importing user (username removed) wit...
Good afternoon all!! I'm having challenges setting up a Cisco RV220w site to site that routes more than 1 network on the other side of the RV220w. This may be a limitation of the firewall on the other side as well. The main office has a Watchguard 5...
Good afternoon! Not having much luck searching for this answer.I am trying to find a way to identify a transfer in ICM so I can divert the call flow. We run 7.5.10 on the UCCE side, 7.1.3 on the UCM side, and 7.0 on the IPIVR side. We have a set o...
FYI for anyone else who runs across this and is trying to modem passthrough from a vg320 to SIP gateway the fix was this on the VG320: voice service voipfax protocol noneno fax-relay sg3-to-g3 <--- adding this line resolved our issue Thanks to all wh...
Adding one more bit of info.
Pradorobin stated they were looking to refine the search instead of getting all the hunt groups configured in CUCM. I took adam's query (THANKS ADAM) and with a slight modification it will list a specific group:
run ...
Hey guys thanks for the replies.
Yes we have modem pass through enabled on the gateway. It is setup in SCCP mode from CUCM to VG320. Below is a snip from our gateway config:
I believe adding the modem pass through on the sip gateway was tried ...
Hey guys thanks for the help!
Turns out I guess Unity will hold LDAP imports in a separate database as "potential" users you can import INTO unity. So even though we changed the title to fix the issue originally, it was still failing the import. M...